?
Solved

di-604 dlink router open ports help

Posted on 2010-11-23
9
Medium Priority
?
517 Views
Last Modified: 2012-05-10
hello at my home I have the Router in the title. I am trying to open up my network for Airvideo, and also the 3g microCell. I have added virtual servers, but will not let me put 0.0.0.0 can anyone help been working on this for a while thank you
0
Comment
Question by:zenworksb
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 5
  • 4
9 Comments
 
LVL 3

Expert Comment

by:khuphuc
ID: 34197307
could you please post  the screenshot of the configuration web page where you can put 0.0.0.0?
0
 

Author Comment

by:zenworksb
ID: 34197348
thank you yes I will put it now
0
Building an interactive eFuture classroom

Watch and learn how ATEN provided a total control system solution including seamless switching matrix switch, HDBaseT extenders, PDU, lighting control to build an interactive eFuture classroom.

 
LVL 3

Accepted Solution

by:
khuphuc earned 2000 total points
ID: 34197438
You are using a port forwarfing screen, d-link call virtual server but you have to understand, like as port forwarding,

you have to config for example in this mode

airvideo client (IP:192.168.0.10x i guest) port 45633


Name: demo
private IP: 192.168.0.10x
Protocol: (i'm not sure), i guest tcp
private port 45633
public port 45633
schedule always

it's can be understand of you router as:

when you client 192.168.0.10x, contac airvideo services, server
any Internet request to you client, try to use your external ip address, frequently dinamic if you use adsl, then the router expouse the external port 45633, and it's know that if receive a request on that port it's connect to you requesting airvideo client 192.168.0.10x. port 45633


try this


0
 

Author Comment

by:zenworksb
ID: 34197457
so do i add the external ip address that the world sees or do i add the internal ip address of the server that is hosting airvideo

and fo rthe 3g microcell there is no ip on that?
0
 
LVL 3

Expert Comment

by:khuphuc
ID: 34197479
internal ip one's

0
 
LVL 3

Expert Comment

by:khuphuc
ID: 34197505
what is 3g microcell? i'm italian, and i'm practical on at&t technolgies?

0
 

Author Comment

by:zenworksb
ID: 34197595
i got the air video to work, but the 3g microcell is the cell that you plug in your network
0
 
LVL 3

Expert Comment

by:khuphuc
ID: 34197699
3g microcell use a program?, could you find the PID, then trought DOS command Line

netstat -ano |find "<PID>" it this program use a port you have to found something in LISTENING

then open this port and it's done

i'm looking the demo on the at&t site, if i understood the use the Broadband adsl , to inclease your wireless 3g signal cellphones, then i think that he become a client on the adsl line and a server on the wireless signal, then like a client i don't think that you have to config any port.....

what do you think?

what error do you have?
0

Featured Post

ATEN's HDBaseT Presentation at InfoComm 2017

Hear ATEN Product Manager YT Liang review HDBaseT technology, highlighting ATEN’s latest solutions as they relate to real-world applications during her presentation at the HDBaseT booth at InfoComm 2017.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a collection of issues that people face from time to time and possible solutions to those issues. I hope you enjoy reading it.
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

801 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question