Solved

VMware View CAC card reader

Posted on 2010-11-23
4
1,375 Views
Last Modified: 2012-05-10
Using active client 6.1 CaC card authentication with VMware View workstations. Having an issue where when trying to connect to a vm via rdp the vm tells me the drivers needed for the CaC card are not loaded. Once logged into an admin account the Cac reads the card. Has anyone seen an issue like this? Thanks in advance.
 
0
Comment
Question by:Jeff2009
  • 2
4 Comments
 
LVL 3

Accepted Solution

by:
Virtalicious earned 500 total points
ID: 34200311
The user has limited rights on the Guest.
You need to grant them the required facilities for the CaC system to work with them in their own context.

Go back and review the Active Client Install documents as they will certainly have the required AD Roles or Privs


-Virt
0
 

Author Comment

by:Jeff2009
ID: 34248541
Speaking with my engineer he says he believes its a driver issue with the DOD CAC reader. the CAC works fine with the physical workstations. It's just when attempting to use with with the virtual enviroment is where we are having the issues.
0
 

Author Comment

by:Jeff2009
ID: 34250065
When using VM View client 4.5  I can connect to the virtual session.  At the top is says no suitable usb devices available and I'm not able to log on with CAC
0
 

Expert Comment

by:kwtmr
ID: 34685606
We are having similar issues with our VMware View implementation.  However, I do have the VM coming up and under "Connect USB Device" at the top of our window, it lists the CAC reader but when clicked on it comes up saying it is "Unable to connect 'Smart Terminal XX44' device.  Device may be in use by another application."  Our thin client is the HP GT7720 and we are using View 4.5 with an XP VM.  Read somewhere else that the View Agent MUST be installed on the VM AFTER the Active Client.  This was on a page speaking to using the CAC for login authentication which we are not using.  Just need to be able to use the reader in the View provided VM.
0

Featured Post

Backup Your Microsoft Windows Server®

Backup all your Microsoft Windows Server – on-premises, in remote locations, in private and hybrid clouds. Your entire Windows Server will be backed up in one easy step with patented, block-level disk imaging. We achieve RTOs (recovery time objectives) as low as 15 seconds.

Join & Write a Comment

Suggested Solutions

Using a software based iSCSI solution, there is no requirement to purchase a hardware iSCSI initiator or TOE (TCP/IP Offload Engine) interface card. A standard network interface card can be used to connect an existing ESXi server to a remote iSCSI t…
It Is not possible to enable LLDP in vSwitch(at least is not supported by VMware), so in this article we will enable this, and also go trough how to enabled CDP and how to get this information in vSwitches and also in vDS.
Teach the user how to install ESXi 5.5 and configure the management network System Requirements: ESXi Installation:  Management Network Configuration: Management Network Testing:
Teach the user how to install and configure the vCenter Orchestrator virtual appliance Open vSphere Web Client: Deploy vCenter Orchestrator virtual appliance OVA file: Verify vCenter Orchestrator virtual appliance boots successfully: Connect to the …

705 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

17 Experts available now in Live!

Get 1:1 Help Now