Solved

Configuring cisco webvpn bookmarks

Posted on 2010-11-23
5
1,075 Views
Last Modified: 2012-05-10
Hello,
I am trying to customize the webvpn for our company and I am having some problems getting this accomplished.

First off, I need to setup a couple of ICA connections to our Citrix Presentation Server (4.5). I installed the plugin to the ASA.

In address bar of the webvpn, I can have an ica://MyServer and this does a desktop connect to the citrix server. How do I make the shortcut to go to a specific application and not a shared desktop?

Also, I am having problems with connecting to an internal sharepoint site. I am guessing that the reason for this is with authentication. How do I properly pass on credentials from the webvpn to a shorepoint site?

Thanks
0
Comment
Question by:bullhog
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
5 Comments
 
LVL 11

Expert Comment

by:DIPRAJ
ID: 34204127
0
 
LVL 1

Author Comment

by:bullhog
ID: 34242428
I have seen both of those pages... not really relevant to my current problem.

I am more looking for examples of ICA bookmarks and SharePoint with pass-through authentication on ASDM 6.2.
0
 
LVL 1

Accepted Solution

by:
bullhog earned 0 total points
ID: 34344264
Well I fixed it. I needed to know how to use the right parameters and syntax.
FYI:
Citrix-Server/?InitialProgram=#ProgramName&TWIMode=on&csco_sso=1
0
 
LVL 1

Author Closing Comment

by:bullhog
ID: 34387519
I found out answer on my own
0
 

Expert Comment

by:Messen1
ID: 37702008
Hi bulldog,

Know that this is an old thread but do you mind sharing how you solved the SharePoint problem ?

Thank in advance :-)

Regards,

Messen
0

Featured Post

Will You Be GDPR Compliant by 5/28/2018?

GDPR? That's a regulation for the European Union. But, if you collect data from customers or employees within the EU, then you need to know about GDPR and make sure your organization is compliant by May 2018. Check out our preparation checklist to make sure you're on track today!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
Let’s list some of the technologies that enable smooth teleworking. 
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

751 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question