Solved

Combining ADSL lines

Posted on 2010-11-24
3
352 Views
Last Modified: 2012-05-10
Hi Experts

How do I combine ADSL/WIMAX lines so that if 1 ADSL/WIMAX line is 4mbps then if I have 3 it should be output of 12mbps line as in many lines to give 1 massive line

cheapest option
0
Comment
Question by:BSTIT
  • 2
3 Comments
 
LVL 95

Accepted Solution

by:
Lee W, MVP earned 167 total points
ID: 34203554
Your ISP will have to support bonding them together.  Otherwise, the best you can do is get a multi-WAN router and have 3x4 Mbit lines that roughly load balance each other and offer a maximum download of 4 Mbit (but instead of having just one download at 4 Mb, you should get 3).
0
 
LVL 2

Assisted Solution

by:wnaude
wnaude earned 333 total points
ID: 34204678
0
 
LVL 2

Assisted Solution

by:wnaude
wnaude earned 333 total points
ID: 34204708
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I have seen some questions on problems with SSH/telnet access to Cisco routers that may occur despite the fact that from a PC connected to your LAN, Internet connectivity is in place and users can access Internet sites without any issues.  There are…
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

813 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now