Solved

QOS for UDP port 3343 highest priority on one interface

Posted on 2010-11-24
3
657 Views
Last Modified: 2012-05-10
there are 2 servers connected to 2 different 6500 switches. We would liek to give highest priority to UDP port 3343 for heartbeats between those 2 servers using QOS. Current configuration on one of the 6500

Policy Map xyz
    Class VIRUS
     police cir 32000 bc 8000
       conform-action transmit
       exceed-action drop
    Class class-default
      set ip dscp default

interface GigabitEthernet4/19
 description Server - Vlan 40
 switchport
 switchport access vlan 40
 switchport mode access
 logging event link-status
 load-interval 30
 no snmp trap link-status
 spanning-tree portfast
 spanning-tree bpduguard enable
 service-policy input xyz

this is the configuration I have come up with... what should be the assignment in the policy map??

conf t
ip access-list extended EXCHANGE2010
 permit udp host 10.1.x.x host 10.20.x.x eq 3343
 permit udp host 10.1.x.x host 10.60.x.x eq 3343
end

class-map EXCHANGE2010
  match access-group name EXCHANGE2010

policy-map HBK-QOS
  class EXCHANGE2010
    ????????????????????????
  class VIRUS
   police 32000 8000    conform-action transmit     exceed-action drop
  class class-default
   set ip dscp default
0
Comment
Question by:hkdv
  • 2
3 Comments
 
LVL 11

Expert Comment

by:DIPRAJ
ID: 34207950
0
 

Accepted Solution

by:
hkdv earned 0 total points
ID: 34249210
this was done by configuring set dscp ef for that particular flow.
0
 

Author Closing Comment

by:hkdv
ID: 34281081
this was done by configuring set dscp ef for that particular flow.
0

Featured Post

MIM Survival Guide for Service Desk Managers

Major incidents can send mastered service desk processes into disorder. Systems and tools produce the data needed to resolve these incidents, but your challenge is getting that information to the right people fast. Check out the Survival Guide and begin bringing order to chaos.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Managing 24/7 IT Operations is a hands-on job and indeed a difficult one. Over the years I have found some simple tips and techniques to increase the efficiency of the overall operations. The core concept has always been on continuous improvement; a…
Arrow Electronics was searching for a KVM  (Keyboard/Video/Mouse) switch that could display on one single monitor the current status of all units being tested on the rack.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

756 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question