Solved

Zyxel prestige 600 and a linksys 320N Question:

Posted on 2010-11-25
2
925 Views
Last Modified: 2012-05-10
Hello Experts,

I have new Linksys 320N wifi router,  i als have a old zyxel Prestige 600.

The Linksys wont get a automatic ip number from the Zyxel adsl modem.

Is the a case of to old en to new material?
0
Comment
Question by:bastouw
2 Comments
 
LVL 3

Accepted Solution

by:
khuphuc earned 500 total points
ID: 34211514
Hi when you config and second access point, you have to consider that the second one don't be a client, then if you no config propertly the pretend be the only one access point on the wlan,

could you please upload the configuration wireless setup pages of both access point to see the possibility and maybe suggest a good configuration.
0
 

Author Closing Comment

by:bastouw
ID: 34226724
The ISP provide free of charge a complete new all in one wifi solution if the contract was extende for a year,   we chose to get the new fritzbox,   so the problem automaticly solved itself.

Thanks for the support.
0

Featured Post

Highfive + Dolby Voice = No More Audio Complaints!

Poor audio quality is one of the top reasons people don’t use video conferencing. Get the crispest, clearest audio powered by Dolby Voice in every meeting. Highfive and Dolby Voice deliver the best video conferencing and audio experience for every meeting and every room.

Join & Write a Comment

Getting hacked is no longer a matter or "if you get hacked" — the 2016 cyber threat landscape is now titled "when you get hacked." When it happens — will you be proactive, or reactive?
If your business is like most, chances are you still need to maintain a fax infrastructure for your staff. It’s hard to believe that a communication technology that was thriving in the mid-80s could still be an essential part of your team’s modern I…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

759 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now