Solved

networking and asterisk box

Posted on 2010-11-29
2
320 Views
Last Modified: 2012-05-10
Hi guys,

We have had a sbs2003 server running for a few years.

For a number of reason we are down scaling and going back to using a workgroup.

We have a billion router which all pcs run through.

In this change we need to get our asterisk box up an running again and for some reasons I cannot get it on the network.

here is what ive tried.

- replaced cable.
- tried to connect asterisk box directly to pc to setup static ip but cant get access to it.
- tried connecting asterisk box to router but cant get access to it.

So basic info would be great here as I know im missing something stupid.

0
Comment
Question by:Cheryl Lander
2 Comments
 
LVL 4

Accepted Solution

by:
naveencnair earned 500 total points
ID: 34228444
Hi, Connect your asterisk box to a console display and check if there is any changes in the ip address. Also check the interface status is up.

If both are ok , you can configure a pc with the same ip range and get access to the box.
0
 

Author Closing Comment

by:Cheryl Lander
ID: 34229168
worked great.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Meet the world's only “Transparent Cloud™” from Superb Internet Corporation. Now, you can experience firsthand a cloud platform that consistently outperforms Amazon Web Services (AWS), IBM’s Softlayer, and Microsoft’s Azure when it comes to CPU and …
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

947 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now