Solved

SCCM Adobe Reader 9.2 Deployment

Posted on 2010-11-29
5
601 Views
Last Modified: 2012-05-10
I simply wanna know how to mass deploy Adobe Reader 9.2 to computer on my network. They have various version installed on their computers today, some might even have the latest version 10 or something. I wanna know step by step on how to do this job. Some users have limited rights on the computer. I know ill have to use the Customization wizard from Adobe but i realy need a step by step guide, please help. Thanks. All the computers have Windows xp installed. Thanks in advance.

Just for information, iv tried deploying it on the test computer whole day, with various errors, so i wanna start from scrath to get everything done properly.
0
Comment
Question by:RicohIT
  • 3
  • 2
5 Comments
 
LVL 23

Expert Comment

by:Stelian Stan
ID: 34230579
If you want a Step by Step Deployment you can follow this: http://www.404techsupport.com/2009/06/26/how-to-apply-patches-msp-to-group-policy-deployed-software-msi/
This describe how to deploy Adobe Reader using GPO. It works perfectly for any Adobe Reader version.
0
 
LVL 23

Expert Comment

by:Stelian Stan
ID: 34230700
Or you can download the AdobeReader.exe file and run this command:

<path to>\AdbeRdr90_en_US.exe -nos_o"Reader9" -nos_ne

Change <path to> to your drive
Change "AdbeRdr90_en_US.exe" to your file name

This command will extract the msi file to "Reader9" folder. Follow this (http://www.404techsupport.com/2010/04/13/using-group-policy-to-deploy-adobe-acrobat-9-3-2/2/) to setup GPO.
0
 

Assisted Solution

by:RicohIT
RicohIT earned 0 total points
ID: 34236814
I dont wanna use GPO for this update, i would rather like to use SCCM. I know that you can extract the exe file with command provided above, but it extracts msi files which is 4-5mb. Along with this it has a data.cab file, how am i suppose to dploye that thru SCCM, when in SCCM you provide 1 file with everything in it.
0
 

Accepted Solution

by:
RicohIT earned 0 total points
ID: 34375635
OK. I have solved this matter myself. For people who  might need help with that, here`s what i did:

Made new Package and then new program. Command line i used in the new program was the following: AdbeRdr920_nb_NO.exe /sAll  (/sAll for silent installation). This would automatically uninstall all previous version and stop the installation if target computer have later version then 9.2. I did not use any program to modify the exe or made any MSI file, i simply used the exe file downloded from Adobes website without modifying it at all.
Remember to provide path of the exe file in "Start in" right underneath where u have the command line.
0
 

Author Closing Comment

by:RicohIT
ID: 34399287
Solved it mysel
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

867 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

16 Experts available now in Live!

Get 1:1 Help Now