Solved

Dell 6224 Powerconnect startup configurations

Posted on 2010-11-29
3
912 Views
Last Modified: 2012-05-10
Hello there;

I really need someone to help me with this as I really need help.

I have new Switch and I like to set the web management interface on it with the following config:

- Create a new vlan
- Set the web management interface to be on port 24
- Add port 24 to the new vlan
- Setup IP Address, subnet mask and Getaway for the web management interface on port 24




PLEASE ANSWER THE ONES WITH QUESTION MARKS:


1. create a vlan  ie: 20

 console#configre
console#vlan database
console#vlan 20
console#exit 

Open in new window


2. Select port 24

interface ethernet 1/g24

Open in new window


3. set ip Address, Subnet mask and getway on port 24

???

4. make port24 part of the vlan

switchport access vlan 20

Open in new window



Thanks
0
Comment
Question by:atigris
  • 2
3 Comments
 
LVL 11

Expert Comment

by:techhealth
Comment Utility
Are you sure you can pin the Web Server to a specific physical port?  You can certainly set the TCP port  the Management Service listens on by ip http port or ip https port
0
 
LVL 2

Accepted Solution

by:
atigris earned 0 total points
Comment Utility
I found the answer on my own; you can only configure IP Address and subnet mask on vlan and not on a specific port . so what I had to do is to create a vlan and set the IP Address /subnet mask on it. then add the port to that vlan.

[nsole#configre

console(config)#interface ethernet 1/g24

console(config-if-1/g24)#switchport access vlan 30
Warning: The use of large numbers of VLANs or interfaces may cause significant
delays in applying the configuration./code]

Open in new window


Thanks
0
 
LVL 2

Author Closing Comment

by:atigris
Comment Utility
it is working now ...
0

Featured Post

Threat Intelligence Starter Resources

Integrating threat intelligence can be challenging, and not all companies are ready. These resources can help you build awareness and prepare for defense.

Join & Write a Comment

Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
Problem Description:   Couple of months ago we upgraded the ADSL line at our branch office from Home to Business line. The purpose of transforming the service to have static public IP’s. We were in need for public IP’s to publish our web resour…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now