Solved

Adtran qos

Posted on 2010-11-29
6
1,132 Views
Last Modified: 2012-05-10
Hello i am trying to setup a simple qos rule

i want traffic from frontend to have 60kb gurantee (limit)
same goes for sonicwall
.31 device should have unlimited bandidth at all tiimes unless front end or sonicwall need their 60kb

here is my config please help (dont mind the low kb, testing only)


!
!
! ADTRAN, Inc. OS version 15.12.00
! Boot ROM version 12.02.00
! Platform: NetVanta 3205 AC, part number 1202870L1
! Serial number LBADTN0617AA807
!
!

!
clock timezone -5-Eastern-Time
!
ip subnet-zero
ip classless
no ip domain-lookup
ip routing
!
no auto-config
!
event-history on
no logging forwarding
no logging email
logging email priority-level info
!

!
ip firewall
no ip firewall alg msn
no ip firewall alg h323
!
!
!
!
!
!
!
!
!
qos map daily 99
  match list frontend
  priority 60
  set precedence 2
qos map daily 100
  match list s2-sonicwall
  priority 60
  set precedence 2
qos map daily 101
  match list s1
  priority unlimited
  set precedence 3
!
!
!
interface eth 0/1
  ip address  192.168.1.1  255.255.255.0
  access-policy Private
  no shutdown
!
!
!
!
interface t1 1/1
  tdm-group 1 timeslots 1-24 speed 64
  no shutdown
!
interface t1 1/2
  clock source through
  tdm-group 1 timeslots 1-24 speed 64
  no shutdown
!
interface ppp 1
 
  access-policy Public
  ppp multilink
  no fair-queue
  qos-policy out daily
  no shutdown
  cross-connect 1 t1 1/1 1 ppp 1
  cross-connect 2 t1 1/2 1 ppp 1
!
!
!
!
!
!
ip access-list standard MATCHALL
  permit any
!
ip access-list standard self
  permit any
!
!
ip access-list extended frontend
  permit tcp host 192.168.1.7  any eq www   log
!
ip access-list extended s1
  remark BDR Offsite backups
  permit tcp host 192.168.1.131  any eq www  
!
ip access-list extended s2-sonicwall
  permit tcp host 192.168.1.2  any eq www   log
!
ip access-list extended sonicwallout
  permit ip host 192.168.1.2  any  eq www   log

for some reason i get not matches when i do show ip acc <acl>

!


!
0
Comment
Question by:Kylo Ren
  • 3
  • 3
6 Comments
 
LVL 5

Author Comment

by:Kylo Ren
ID: 34236380
when i download from the internet it does not make a difference
0
 
LVL 33

Expert Comment

by:digitap
ID: 34236468
have you configured any bandwidth management settings on the sonicwall?  also, the adtran is the ISP router (T-1?) and your sonicwall is the firewall?
0
 
LVL 5

Author Comment

by:Kylo Ren
ID: 34243451
sonicwall doesnt have any qos options and is inline with router including same lan  segment. 192.168.1.1 router 192.168.1.2 sonicwall

adtran is isp router with natting and acl
0
MIM Survival Guide for Service Desk Managers

Major incidents can send mastered service desk processes into disorder. Systems and tools produce the data needed to resolve these incidents, but your challenge is getting that information to the right people fast. Check out the Survival Guide and begin bringing order to chaos.

 
LVL 33

Accepted Solution

by:
digitap earned 500 total points
ID: 34243476
ok...i'm not sure i can be much help on the adtran.  depending on the model of sonicwall and whether you are using the enhanced or standard OS, you can perform QoS on the sonicwall appliances.  you must enable bandwidth management first, then you can configure firewall rules to apply the QoS.
0
 
LVL 5

Author Closing Comment

by:Kylo Ren
ID: 34305424
ok i solved the issue by applying qos map to eth0 instead of ppp1

traffic shaping for eth0 needs to be enabled 1st.
0
 
LVL 33

Expert Comment

by:digitap
ID: 34305582
so, you're doing our QoS from the adtran rather than the sonicwall?

by the way, thanks for the points!
0

Featured Post

Create the perfect environment for any meeting

You might have a modern environment with all sorts of high-tech equipment, but what makes it worthwhile is how you seamlessly bring together the presentation with audio, video and lighting. The ATEN Control System provides integrated control and system automation.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
How VPC help preventing STP Loops 4 149
adjusting startup config 6 48
Port Forwarding 4 51
Router speed limit 7 57
Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
Getting hacked is no longer a matter or "if you get hacked" — the 2016 cyber threat landscape is now titled "when you get hacked." When it happens — will you be proactive, or reactive?
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

685 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question