Solved

Allocate a LUN in cluster environment. (with 2 or 3 node cluster)

Posted on 2010-11-30
6
1,268 Views
Last Modified: 2013-11-14
How to allocate a LUN in cluster environment. (with 2 or 3 node cluster). in symmetrix
What are the portflag setting that needs to be set when we assign lun to the vcs cluster in Symmetrix
0
Comment
Question by:faraz81116
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 4
  • 2
6 Comments
 
LVL 30

Accepted Solution

by:
Duncan Meyers earned 500 total points
ID: 34244932
This is a useful resource: http://www.bakercomputeranddata.com/doc/vendors/emc/emc-docs/ECC5.2/help/ecc/symm_mgr/cfgmn_pd_setting_port_flags.htm.

You need the following director bits set for Windows/VMware. Nothing extra required for Windows or VMware clusters.
Enable Auto Negotiation (EAN)
Enable Point-to-point (PP)
Unique World Wide Name (UWN)
Common Serial Number (C)
SCSI 3 (SC3)
Common Serial Number (C) 4
Disable Queue Reset on Unit Attention (D)
Enable Volume Set Addressing (V)
SCSI-2 Compliance (iSCSI) (SPC-2)

There are some additonal settings for Sun etc clusters - see the link above.
0
 

Author Comment

by:faraz81116
ID: 34245649
When i  opened the link it gives me whole bunch of  port flags which made me confused
\ Can you tell specifically which all sets needs to be enabled for vcs cluster
0
 
LVL 30

Assisted Solution

by:Duncan Meyers
Duncan Meyers earned 500 total points
ID: 34246505
VCS = Veritas Cluster Server? Is that correct?
0
Complete VMware vSphere® ESX(i) & Hyper-V Backup

Capture your entire system, including the host, with patented disk imaging integrated with VMware VADP / Microsoft VSS and RCT. RTOs is as low as 15 seconds with Acronis Active Restore™. You can enjoy unlimited P2V/V2V migrations from any source (even from a different hypervisor)

 

Author Comment

by:faraz81116
ID: 34246796
Yes sir ...What all would be the port flag settings and  the volume bit settings in symmetrix  that need to be set for allocation of lun to veritas cluster servr
0
 
LVL 30

Assisted Solution

by:Duncan Meyers
Duncan Meyers earned 500 total points
ID: 34262238
The port flag settings are as above. You've got a bit of work to do with VCS though: http://sfdoccentral.symantec.com/sf/5.1/windows/pdf/VCS_SRDF_Agent.pdf
0
 
LVL 30

Expert Comment

by:Duncan Meyers
ID: 34387841
Thanks! Glad I could help.
0

Featured Post

Free Tool: Port Scanner

Check which ports are open to the outside world. Helps make sure that your firewall rules are working as intended.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

I previously wrote an article addressing the use of UBCD4WIN and SARDU. All are great, but I have always been an advocate of SARDU. Recently it was suggested that I go back and take a look at Easy2Boot in comparison.
In this article we will learn how to backup a VMware farm using Nakivo Backup & Replication. In this tutorial we will install the software on a Windows 2012 R2 Server.
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…
This Micro Tutorial will teach you how to reformat your flash drive. Sometimes your flash drive may have issues carrying files so this will completely restore it to manufacturing settings. Make sure to backup all files before reformatting. This w…

710 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question