?
Solved

FM - Intermediate/Advanced Portal Filter Issue

Posted on 2010-11-30
2
Medium Priority
?
863 Views
Last Modified: 2012-05-10
I have successfully been able to create portal filters for County, Town, (and with EE help) even a multi-selection Building Type field.  However, now I am trying to add Unit Sq Ft and Rent/Month.  However, it did not work.  Where did I go wrong?

See screen prints attached.  The two new fields are related are as follows:
1. cfilterBldgType_Select (see screen print)
2. The c_FilterUnitSF (this calc field contains):
Case (
SQ_FT  = 700; "0-700" ;
SQ_FT   = 701 and SQ_FT  = 1000; "701-1000" ;
SQ_FT   = 1001 and SQ_FT  = 1200; "1001-1200" ;
SQ_FT   = 1201 and SQ_FT  = 1500; "1201-1500" ;
SQ_FT   = 1501 and SQ_FT  = 2000; "1501-2000" ;
SQ_FT   = 2001 and SQ_FT  = 4000; "2001-4000" ;
SQ_FT   = 4001 and SQ_FT  = 9000; "4001-9000" ;
SQ_FT   = 9001; "9001 & over" ;
ValueListItems ( Get ( FileName );"RentalSqFt" )
)

My value list is
"RentalSqFt"
0-700
701-1000
1001-1200
1201-1500
1501-2000
2001-4000
4001-9000
9001 & over
-UnitSFFilterIssue.JPG
-UnitSFfilterIssue2.JPG
-UnitSFfilterIssue3.JPG
0
Comment
Question by:rvfowler2
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 25

Accepted Solution

by:
Will Loving earned 2000 total points
ID: 34241618
The first thing I would check is that your selection field and your calculation field result are both text and not numbers. It also looks to me like your calculation for c_FilterUnit SF_Select is referencing the wrong global field. It references g_FilterBldgType instead of g_FilterUnitSF.
0
 
LVL 2

Author Closing Comment

by:rvfowler2
ID: 34241958
Crud, it was the reference to the wrong global field.  I changed that somewhere and most not have saved it one time.

Also, good catch on the number vs. text, but I had already thought of that.  Normally, a calc for SF would result in a number, but when you are representing it with a range, it is text.

Thanks.
0

Featured Post

On Demand Webinar: Networking for the Cloud Era

Did you know SD-WANs can improve network connectivity? Check out this webinar to learn how an SD-WAN simplified, one-click tool can help you migrate and manage data in the cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Conversion Steps for merging and consolidating separate Filemaker files The following is a step-by-step guide for the process of consolidating two or more FileMaker files (version 7 and later) into a single file with multiple tables. Sometimes th…
Having just upgraded from Filemaker 11 to Filemaker 12 over the weekend, we thought we would add some tips for others making the same move.  In general, our installation went without incident. Please note that this is not a replacement for Chapter 5…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Do you want to know how to make a graph with Microsoft Access? First, create a query with the data for the chart. Then make a blank form and add a chart control. This video also shows how to change what data is displayed on the graph as well as form…

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question