Link to home
Start Free TrialLog in
Avatar of mavcom
mavcomFlag for Afghanistan

asked on

HP Laserjet CM2320Fxi not bootinh

Hi;

I changed the fax interface card on the HP CM2320 fxi printer and since then it will not complete the boot process even after I put the old card back in.
The status bar shows goes up to about one third of the way but it goes no further than that.

I really need to get this machine up.

You assistance will be needed.
Avatar of Dr. Klahn
Dr. Klahn

Here is a link to the CM2320 printer service manual.  There is an "enhanced" (i.e., better than the user manual) troubleshooting section starting on page 225 and continuing through page 226, including a section on troubleshooting printers with the fax options.
... bah! "starting on page 225 and continuing through page 326."
Avatar of mavcom

ASKER

Hi;

Thank you for assisting but I already have the manual and so far it does not address this issue. Remember the machine has not yet booted so none of the options which can only be executed from the control panel can be used.
ASKER CERTIFIED SOLUTION
Avatar of mavcom
mavcom
Flag of Afghanistan image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of mavcom

ASKER

Thank you but non of the other information provided was able to resolve the issue. It is being sent back to the company who sold it.