Link to home
Create AccountLog in
Avatar of adamn123
adamn123

asked on

Network Resourses on XP VPN Host

I have a XP machine running my VPN connection (Server).
I am able to connect to the VPN with the remote pc.
I am able to ping the xp machine running the VPN connection.
I am unable to ping anything else on the host netowork.
Avatar of netcmh
netcmh
Flag of United States of America image

Very little to go on.

What protocol are you using?
What's the IP range on both sides?
Which OS is on the client?
etc.

Fill in more details and you'll get your answer sooner.
Is your VPN server handing out IP addresses? Does the client get a use-able IP?
here's a quick step by step on setting up a VPN server on winxp properly.
make sure that the IP range you're handing out isn't the same as your internal network
here's a step by step for both server and client configs with pics: http://forums.bit-tech.net/showthread.php?t=64926
Avatar of adamn123
adamn123

ASKER

What protocol are you using?
I made imcomming conenction on the XP Host machine.  I believe this is using PPTP
What's the IP range on both sides?
IP range on the host is 192.168.11.x  
IP range on the client is 10.10.x.x
Which OS is on the client?
XP Pro
 your VPN server handing out IP addresses?
Yes
Does the client get a use-able IP?
Yes

Client informaton:
PPP adapter Home:

        Connection-specific DNS Suffix  . :
        Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
        Physical Address. . . . . . . . . : 00-53-45-00-00-00
        Dhcp Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 192.168.11.138
        Subnet Mask . . . . . . . . . . . : 255.255.255.255
        Default Gateway . . . . . . . . . :
        DNS Servers . . . . . . . . . . . : 67.69.235.1
                                            207.164.234.193
        NetBIOS over Tcpip. . . . . . . . : Disabled
Host Information:
Ethernet adapter Local Area Connection 2:

        Connection-specific DNS Suffix  . :
        Description . . . . . . . . . . . : VIA Rhine II Fast Ethernet Adapter
        Physical Address. . . . . . . . . : 00-18-71-86-54-4E
        Dhcp Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 192.168.11.75
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        IP Address. . . . . . . . . . . . : fe80::218:71ff:fe86:544e%4
        Default Gateway . . . . . . . . . : 192.168.11.1
        DNS Servers . . . . . . . . . . . : 67.69.235.1
                                            207.164.234.193
                                            fec0:0:0:ffff::1%1
                                            fec0:0:0:ffff::2%1
                                            fec0:0:0:ffff::3%1
PPP adapter RAS Server (Dial In) Interface:

        Connection-specific DNS Suffix  . :
        Description . . . . . . . . . . . : Internal RAS Server interface for di
al in clients
        Dhcp Enabled. . . . . . . . . . . : No
        IP Address. . . . . . . . . . . . : 192.168.11.138
        Subnet Mask . . . . . . . . . . . : 255.255.255.255
        Default Gateway . . . . . . . . . :

Thanks for the step by step.
That is pretty much what I did.
I can connect fine and everything just can not see other resourses on the 192.168.11.x network.
One thing I noticed but don't know if it means anything.

Host:
        IP Address. . . . . . . . . . . . : 192.168.11.75
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
Client:
        IP Address. . . . . . . . . . . . : 192.168.11.138
        Subnet Mask . . . . . . . . . . . : 255.255.255.255

Subnet is different but I do not set the subnet on the client machine.
ASKER CERTIFIED SOLUTION
Avatar of netcmh
netcmh
Flag of United States of America image

Link to home
membership
Create an account to see this answer
Signing up is free. No credit card required.
Create Account
Thanks for the grade. Hope it worked out well for you. Good luck