Link to home
Create AccountLog in
Avatar of trojan81
trojan81

asked on

Change port speed 6509

I have a 600mb p2p circuit from AT&T that terminates from a 6509 at the remote location to a 6509 at the hub location.
Both sides terminate into a 1GB connection.
When I put the links in solarwinds for monitoring, it sees it as 1GB which throws off the statistics.
How can I change it to read 600MB? I believe it needs to be done on the switch.
Avatar of vikrantambhore
vikrantambhore
Flag of India image

You cannot see input/output rate equivalent on c6509 but only total numbers of octets

since the last interface counter clearing.

If you want to have average input/output

numbers as on IOS based switch, clear the counter on the specific interface, and measure

the number of octets for a time period.

 
Alternative solution is to pool this information to MRTG or PRTG tool so no need

in CatOS CLI digging.

 
HTH,

Vikrant
ASKER CERTIFIED SOLUTION
Avatar of SeeMeShakinMyHead
SeeMeShakinMyHead

Link to home
membership
Create an account to see this answer
Signing up is free. No credit card required.
Create Account
Avatar of trojan81
trojan81

ASKER

Sorry Vikrant. I meant to split this.