Solved

Virtual PPP Interface IP Addressing scheme recommendation

Posted on 2011-02-10
2
594 Views
Last Modified: 2012-05-11
I am looking for recommendations on IP Addressing schemes for configuring the virtual PPP interface on a PTP T1 on 2 ADTRAN Netvanta 3430's.  I'd like to know how close I can get it to coordinate with the Ethernet IP's.  

For instance I have an eth 0/1 ip of 192.168.1.1 255.255.255.0 on corp side.
Then I have an eth 0/1 ip off 192.168.3.1 255.255.255.0 on branch side.

What is the recommended virt. ppp ip addresses?

Can it be 192.168.1.2 on the 1.1 side and 192.168.3.2 on the 3.1 side??
Or does it have to be something different?

Thanks!!
0
Comment
Question by:GFCU
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 21

Accepted Solution

by:
Rick_O_Shay earned 500 total points
ID: 34870690
You would need to use a new subnet between the two routers like 192.168.100.0 with a mask of 255.255.255.252. That  allows you just the 192.168.100.1 and 192.168.100.2 host addresses but that is all you need.
0
 
LVL 1

Author Comment

by:GFCU
ID: 34870990
Ok, I will configure it with a different subnet.

Just curious..  why?  
0

Featured Post

Are You Headed to Black Hat USA 2017?

Getting ready for Black Hat next week? Kick things off with the WatchGuard Badge Challenge and test your puzzle and cipher skills. Do you have what it takes to earn our limited edition Firebox Badge? Get started today - https://crimsonthorn.net

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
ADCs have gained traction within the last decade, largely due to increased demand for legacy load balancing appliances to handle more advanced application delivery requirements and improve application performance.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
If you're a developer or IT admin, you’re probably tasked with managing multiple websites, servers, applications, and levels of security on a daily basis. While this can be extremely time consuming, it can also be frustrating when systems aren't wor…

632 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question