Solved

Dual ADSL Router/FIrewall

Posted on 2011-02-10
3
326 Views
Last Modified: 2012-05-11
I have the following requirement:

I have a block of 10 public IP address and need to use two of those.
I need a ADSL/Firewall device that woud allow to direct traffic (HTTP and HTTPs) to two different servers in my private network, each server is on a different subnet.
This is an exmaple of what I need:
Public: 82.xxx.xxx.122 natting to private 192.168.16.1
Public: 82.xxx.xxx.123 natting to private 192.168.17.2

Currently I have a Xizel 660 router set in nat mode.
The Zyxel is connected to a Watchguard 10e firewall
All the traffic is directed to 192.168.16.1

Can anyone suggest a device that will help me route external traffic to two different internal subnets?

Thanks
0
Comment
Question by:caratech
3 Comments
 

Expert Comment

by:adelatorre204
ID: 34868402
Are  you saying you can only set up a single nat in your current router?

Almost any router you choose will let you nat each of your public ip's to a private IP.

At home I'm using a Cisco WRVS4400N, it can do this.  
0
 
LVL 11

Accepted Solution

by:
Old User earned 500 total points
ID: 34869910
You need to set your router to bridged mode Ths is the key step
Give the WAN interface on the watchguard an External IP one up from the router
Add all your external IPs to the WAN interface as secondary IPs

Give LAN 0 an ip in the 192.168.16.0 range
Give LAN 1 an ip in the 192.168.17.0 range

Then  create a 1 to 1 NAT on the watchguard

82.xxx.xxx.122 natting to private 192.168.16.1
82.xxx.xxx.123 natting to private 192.168.17.2

If you are not useing firmware version 11.3.2 then upgrade and use h Watchguard System Manager to configure your device it is much easier to use than the Webinterface

0
 

Author Closing Comment

by:caratech
ID: 35002085
thnk you, this has pointed me in the right direction. The latest firmware version for my warchguard does pretty much what I need along the lines you suggested.
0

Featured Post

Better Security Awareness With Threat Intelligence

See how one of the leading financial services organizations uses Recorded Future as part of a holistic threat intelligence program to promote security awareness and proactively and efficiently identify threats.

Join & Write a Comment

Suggested Solutions

There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now