Solved

OID for HP R5500 XR UPS

Posted on 2011-02-11
2
1,994 Views
Last Modified: 2013-12-11
Hello guys,

I am looking OID for HP R5500 XR UPS

I need input voltage, output valtage, battery status, battery usage, internal temp, internal humidity.

I needed for PRTG Monitor

Tnx A lot !!!
0
Comment
Question by:gdamir
  • 2
2 Comments
 

Accepted Solution

by:
gdamir earned 0 total points
Comment Utility
/* SNMP OIDs set */
#define CPQPOWER_OID_UPS_MIB          "1.3.6.1.4.1.232.165.3"
#define CPQPOWER_OID_MFR_NAME         "1.3.6.1.4.1.232.165.3.1.1.0"      /* UPS-MIB::upsIdentManufacturer */
#define CPQPOWER_OID_MODEL_NAME       "1.3.6.1.4.1.232.165.3.1.2.0"      /*
UPS-MIB::upsIdentModel */
#define CPQPOWER_OID_FIRMREV          "1.3.6.1.4.1.232.165.3.1.3.0"      /* UPS-MIB::upsIdentUPSSoftwareVersion */
#define CPQPOWER_OID_OEMCODE          "1.3.6.1.4.1.232.165.3.1.4.0"      /* UPS-MIB::upsIdentAgentSoftwareVersion */

#define CPQPOWER_OID_BATT_RUNTIME     "1.3.6.1.4.1.232.165.3.2.1.0"      /* UPS-MIB::upsEstimatedMinutesRemaining */
#define CPQPOWER_OID_BATT_VOLTAGE     "1.3.6.1.4.1.232.165.3.2.2.0"      /* UPS-MIB::upsBatteryVoltage */
#define CPQPOWER_OID_BATT_CURRENT     "1.3.6.1.4.1.232.165.3.2.3.0"      /* UPS-MIB::upsBatteryCurrent */
#define CPQPOWER_OID_BATT_CHARGE      "1.3.6.1.4.1.232.165.3.2.4.0"      /* UPS-MIB::upsBattCapacity */
#define CPQPOWER_OID_BATT_STATUS      "1.3.6.1.4.1.232.165.3.2.5.0"      /* UPS-MIB::upsBatteryAbmStatus */

#define CPQPOWER_OID_IN_FREQ          "1.3.6.1.4.1.232.165.3.3.1.0"      /*
UPS-MIB::upsInputFrequency */
#define CPQPOWER_OID_IN_LINEBADS      "1.3.6.1.4.1.232.165.3.3.2.0"      /* UPS-MIB::upsInputLineBads */
#define CPQPOWER_OID_IN_LINES         "1.3.6.1.4.1.232.165.3.3.3.0"      /* UPS-MIB::upsInputNumPhases */

#define CPQPOWER_OID_IN_PHASE         "1.3.6.1.4.1.232.165.3.3.4.1.1"      /*
 UPS-MIB::upsInputPhase */
#define CPQPOWER_OID_IN_VOLTAGE       "1.3.6.1.4.1.232.165.3.3.4.1.2"      /* UPS-MIB::upsInputVoltage */
#define CPQPOWER_OID_IN_CURRENT       "1.3.6.1.4.1.232.165.3.3.4.1.3"      /* UPS-MIB::upsInputCurrent */
#define CPQPOWER_OID_IN_POWER         "1.3.6.1.4.1.232.165.3.3.4.1.4"      /*
UPS-MIB::upsInputWatts */

#define CPQPOWER_OID_LOAD_LEVEL       "1.3.6.1.4.1.232.165.3.4.1.0"     /* UPS-MIB::upsOutputLoad */
#define CPQPOWER_OID_OUT_FREQUENCY    "1.3.6.1.4.1.232.165.3.4.2.0"      /* UPS-MIB::upsOutputFrequency */
#define CPQPOWER_OID_OUT_LINES        "1.3.6.1.4.1.232.165.3.4.3.0"      /* UPS-MIB::upsOutputNumPhases */

#define CPQPOWER_OID_OUT_PHASE        "1.3.6.1.4.1.232.165.3.4.4.1.1"      /* UPS-MIB::upsOutputPhase */
#define CPQPOWER_OID_OUT_VOLTAGE      "1.3.6.1.4.1.232.165.3.4.4.1.2"      /* UPS-MIB::upsOutputVoltage */
#define CPQPOWER_OID_OUT_CURRENT      "1.3.6.1.4.1.232.165.3.4.4.1.3"      /* UPS-MIB::upsOutputCurrent */
#define CPQPOWER_OID_OUT_POWER        "1.3.6.1.4.1.232.165.3.4.4.1.4"      /* UPS-MIB::upsOutputWatts */

#define CPQPOWER_OID_POWER_STATUS     "1.3.6.1.4.1.232.165.3.4.5.0"      /* UPS-MIB::upsOutputSource */

#define CPQPOWER_OID_AMBIENT_TEMP     "1.3.6.1.4.1.232.165.3.6.1.0"     /* UPS-MIB::upsEnvAmbientTemp */

#define CPQPOWER_OID_UPS_TEST_BATT    "1.3.6.1.4.1.232.165.3.7.1.0"     /* UPS-MIB::upsTestBattery */
#define CPQPOWER_OID_UPS_TEST_RES     "1.3.6.1.4.1.232.165.3.7.2.0"     /* UPS-MIB::upsTestBatteryStatus */
0
 

Author Closing Comment

by:gdamir
Comment Utility
I found on my own
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

System overheating may become a serious problem if not taken care of at the proper time. I am writing this article because I faced a similar problem. Intro All electronic devices produce heat, but computers are a special case - the processors bo…
I have purchased two new systems and both are now Universal Extensible Firmware Interface (UEFI) based. UEFI is replacing BIOS for the desktop PC. It is a Linux based firmware with enough robustness it can communicate with a website without loading …
Excel styles will make formatting consistent and let you apply and change formatting faster. In this tutorial, you'll learn how to use Excel's built-in styles, how to modify styles, and how to create your own. You'll also learn how to use your custo…
Access reports are powerful and flexible. Learn how to create a query and then a grouped report using the wizard. Modify the report design after the wizard is done to make it look better. There will be another video to explain how to put the final p…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now