Solved

SonicWall to ISA

Posted on 2011-02-11
3
746 Views
Last Modified: 2012-05-11
Has anyone setup a SonicWall TZ210 IPsec to ISA?

Thanks
0
Comment
Question by:sheinz_57
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 33

Expert Comment

by:digitap
ID: 34871700
no, but i believe is you keep the Phase 1 and Phase 2 settings the same on both ends you should be good.  what version of ISA?  i'd be happy to assist.
0
 

Author Comment

by:sheinz_57
ID: 34871785
Thanks. It is ISA 2006.

I have set them up before on a Fortigate but now I am looking to do so on the SonicWall. I was looking to see if someone has done this successfully before purchasing the TZ 210.
0
 
LVL 33

Accepted Solution

by:
digitap earned 500 total points
ID: 34872477
so, you want to setup a site to site between a sonicwall and a isa, right?

if so, here's a KB on setting up a site to site between two sonicwall appliances.  this will at least get you one side of the vpn.  it's configured for main mode, but i think you'll have better luck with aggressive mode.

https://www.fuzeqna.com/sonicwallkb/consumer/kbdetail.asp?kbid=5857
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Sometimes, you want your microsoft VPN to route all the traffic to the remote network. Usually your employer network. This makes it possible to access all the nodes inside this remote LAN, even if they have no "public DNS" entries. To do so, you wo…
Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

627 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question