Solved

HP L5006tm touchscreen calibration in Windows 7

Posted on 2011-02-11
7
2,273 Views
Last Modified: 2012-06-27
When a HP L5006tm is connected to computer with Windows 7 via USB port. Windows 7 loads a driver to allow the touchscreen to operate. Where is the calibration of the touchscreen found?
0
Comment
Question by:techcodr
  • 4
  • 3
7 Comments
 
LVL 70

Expert Comment

by:Merete
ID: 34877463
Is Pen and Touch from HP installed on the windows 7
HP L5006tm Touchscreen Monitor - Calibration Steps
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=3182543&prodTypeId=382087&objectID=c01707771
0
 

Author Comment

by:techcodr
ID: 34889750
I don't see something called Pen and Touch.
I did try the file (sp37969.exe at the end of the link you provided but that did not work. The readme file says it covered up to Vista.
I tried sw601382 touch driver.exe from http://www.elotouch.com/Support/Downloads/dnld.asp. That sorta works. I am used to if the cursor is an arrow, touching the screen moves the arrow to the location touched. In this case the arrow disappears. (The touch action does occur.)
0
 
LVL 70

Expert Comment

by:Merete
ID: 34892634
right click the task bar > toolbars and choose the "tablet pc input panel"
It will appear on the taskbar running tasks
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 70

Expert Comment

by:Merete
ID: 34892659
Caltouch seems to be a solution for most windows 7 users here with same problem.. look to the bottom.
http://forum.eeeuser.com/viewtopic.php?id=62029
0
 

Author Comment

by:techcodr
ID: 34898557
The question was not broad enough. I am looking for the Elotouch driver so that I have not only the calibrations but also the settings such as sound. In Windows XP touching the screen also generated sound.
0
 

Accepted Solution

by:
techcodr earned 0 total points
ID: 34899175
Checked an existing XP computer with same touchscreen. Noted the driver 5/30/2007 2.50.0.0 is same as on windows 7.
Checked the Elotouch and found version 4.6.3. Therefore the driver version needed should have a higher version. The Elotouch version install was a lower number. Uninstalled.

When back to HP web site, download and installed the vista version. This gave me elotouch version 5.1.1 and that does work.
0
 

Author Closing Comment

by:techcodr
ID: 34936428
Explain is given
0

Featured Post

The Eight Noble Truths of Backup and Recovery

How can IT departments tackle the challenges of a Big Data world? This white paper provides a roadmap to success and helps companies ensure that all their data is safe and secure, no matter if it resides on-premise with physical or virtual machines or in the cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

New Windows 7 Installations take days for Windows-Updates to show up and install. This can easily be fixed. I have finally decided to write an article because this seems to get asked several times a day lately. This Article and the Links apply to…
A quick guide on how to use Group Policy to create a custom power plan and set it active on Windows 7.
This Micro Tutorial will teach you how to change your appearance and customize your Windows 7 interface to your unique preference. This will be demonstrated using Windows 7 operating system.
The viewer will learn how to successfully create a multiboot device using the SARDU utility on Windows 7. Start the SARDU utility: Change the image directory to wherever you store your ISOs, this will prevent you from having 2 copies of an ISO wit…

821 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question