Solved

Faulting application MSACCESS.EXE

Posted on 2011-02-14
2
1,198 Views
Last Modified: 2012-05-11
Periodically, throughout the day, users of an Access 2007.mdb will get knocked out and right back in (Terminal Services) -- occasionally they have to manually reconnect. Their environment is Windows Server 2008. All users connect through remote desktop. I've been told that this could be caused by a bad NIC card. I see occasional Terminal Services drops throughout the day and had been attributing these problems (and the occasional corruptions) to that. Now, I am seeing Application Error Logs and noticed the below. Could this be causing the corruptions and drops?

I have created new front-ends, imported the objects and problem persists. I am constantly compacting and repairing but the problem continues -- sometimes multiple times a day. Any help would be appreciated.
====================================================================================================
Faulting application MSACCESS.EXE, version 12.0.6535.5005, time stamp 0x4bf5c550, faulting module MSACCESS.EXE, version 12.0.6535.5005, time stamp 0x4bf5c550, exception code 0xc0000005, fault offset 0x00126cf0, process id 0x274c, application start time 0x01cbcc7e2563d235.
====================================================================================================

Thanks, Eileen
0
Comment
Question by:Ei0914
2 Comments
 
LVL 59

Accepted Solution

by:
Darius Ghassem earned 500 total points
ID: 34891829
Most likely an issue with TCP Chimney.

First update all network card drivers and firmware.
Go through this link

http://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/Windows_Server_2008/Q_26176031.html

Go to properties of Network Card click Advance Tab disable any Offloads listed.

Reboot server
0
 

Author Closing Comment

by:Ei0914
ID: 35010556
Was the NIC card
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The System Center Operations Manager 2012, known as SCOM, is a part of the Microsoft system center product that provides the user with infrastructure monitoring and application performance monitoring. SCOM monitors:   Windows or UNIX/LinuxNetwo…
Deploying a Microsoft Access application in a Citrix environment is not difficult but takes a few steps. However, Citrix system people are often of little help, as they typically know next to nothing about Access. The script provided here will take …
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
To efficiently enable the rotation of USB drives for backups, storage pools need to be created. This way no matter which USB drive is installed, the backups will successfully write without any administrative intervention. Multiple USB devices need t…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question