Link to home
Start Free TrialLog in
Avatar of fgasimzade
fgasimzadeFlag for Azerbaijan

asked on

Cisco ASA Anyconnect IP Phone SSL VPN

Good morning, gents!

I am about start configuring IP Phone SSL VPN with my ASA, want to buy license now, one thing I noticed in my sh ver on ASA is that there is a line missing :
AnyConnect for Cisco VPN Phone : Disabled  

What does it mean? ASA Version asa821-k8

Full sh ver

Licensed features for this platform:
Maximum Physical Interfaces  : Unlimited
Maximum VLANs                : 150      
Inside Hosts                 : Unlimited
Failover                     : Active/Active
VPN-DES                      : Enabled  
VPN-3DES-AES                 : Enabled  
Security Contexts            : 2        
GTP/GPRS                     : Disabled  
SSL VPN Peers                : 2        
Total VPN Peers              : 750      
Shared License               : Disabled
AnyConnect for Mobile        : Disabled  
AnyConnect for Linksys phone : Disabled  
AnyConnect Essentials        : Disabled  
Advanced Endpoint Assessment : Disabled  
UC Phone Proxy Sessions      : 2        
Total UC Proxy Sessions      : 2        
Botnet Traffic Filter        : Disabled  
This platform has an ASA 5520 VPN Plus license.

Thank you in advance
Avatar of mikegatti

could be that your version of software does not meet the minimum requirements:

ASA 5500 series router with image asa828-7-k8.bin or higher.
Avatar of fgasimzade


But here it says "The ASA software must be version 8.0.4 or later, and the "AnyConnect Cisco VPN Phone" license must be installed. "
Avatar of mikegatti

Link to home
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Yes, thank you, I managed to check it myself, this options starts from 8.3(2)