Solved

Checkpoint Static route

Posted on 2011-02-15
3
1,024 Views
Last Modified: 2012-05-11
I have Checkpoint NGX on a Nokia box. This is my default gateway.
I also have an Cisco ASA with a VPN to another site.
If i configure a system with the ASA as DFGW i can ping accross the VPN.
BUT I would ideally like to keep my Nokia box as DFGW for network and route all traffic to ASA for Network 10.1.0.0/16
I have added a static route in Voyager but the packet get dropped as "spoofed packet" on the nokia
0
Comment
Question by:Rbauckham69
  • 2
3 Comments
 
LVL 13

Accepted Solution

by:
kdearing earned 500 total points
ID: 34897502
Need to add the 10.0.0.0 network to the Checkpoint as a trusted/internal network.
Then add a route for it pointing to the ASA.
0
 

Author Comment

by:Rbauckham69
ID: 34897849
Ok thanks...That worked I can initiate pings from my network but when the remote network pings back it drops?
0
 
LVL 13

Expert Comment

by:kdearing
ID: 34899073
It sounds like a firewall rule somewhere.
Make sure the device on your network accepts pings.
If it's a Windows PC, the Windows firewall won't answer pings by default.
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question