?
Solved

Windows 2003 Guest Hyper-v PING problem

Posted on 2011-02-16
15
Medium Priority
?
823 Views
Last Modified: 2013-11-13
Hello,
I am running several guest server Windows 2003 and 2008 on a Windows 2008 HYPER-V server, and one of the server (Windows 2003 R2 32bit) as a very strange ping behavur.
It has very irregular PING response time when pinging other devices on the network.
It does a few normal Ping and suddenly is shows 5-6 and sometime more ping response with a high time. The high time ping shows at the command prompt very fast (5 ping in 0.02 of a second) and then back to normal for a few ping and it start again.
Each server on the HYPER-V as is own NIC, and I try to change the NIC used by the server without any success. I try to change to port used on the switch as well with no success.
Does anybody know what I can do? I reinstall as well THE HYPER-V integration services and that does not help and reset the IP stack.
Thank you for your help
Serge

PING.docx
0
Comment
Question by:SMPAR2
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 10
  • 5
15 Comments
 
LVL 2

Expert Comment

by:storkyIV
ID: 34905120
Hello,

What AV / Firewall are you using?
0
 

Author Comment

by:SMPAR2
ID: 34905126
ForeFront on all server and workstation and that is the only server who as the problem!
Thank you for your help
0
 

Author Comment

by:SMPAR2
ID: 34905137
Sorry no firewall on the server
0
Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

 
LVL 2

Expert Comment

by:storkyIV
ID: 34905152
Are any errors on the switch?
One of my hyper-v hosts wouldn't respond to ping and appeared offline, but all guests were reporting fine.
Turned out to be a port config error on our Cisco core switch.
0
 

Author Comment

by:SMPAR2
ID: 34905169
I try to change the port on the switch and use on other cable but still the same. When I ping sedently I get 20 responce with TIME=1012 for exemple in 1seconde and then back to normal for a few ping.
0
 
LVL 2

Expert Comment

by:storkyIV
ID: 34905170
Have you checked for driver updates for the NIC?
0
 

Author Comment

by:SMPAR2
ID: 34905182
I have not updated the driver since it is a NIC carte with 4 entry and all the other server using the carte have no problems. Even when I connected the server to the other onboard NIC (Not same carte) it still has the problem. I think it is software problem!
0
 

Author Comment

by:SMPAR2
ID: 34905193
For info user use this server for a Bibliotec software and pictures for a web sites. and they do not have any problem when using it. If you ping the other way (from a PC you ping the server every thing is find)
0
 
LVL 2

Expert Comment

by:storkyIV
ID: 34905211
If you ping the server and all is fine but when you ping out from the server there is an issue I would say that was switch problem?
0
 

Author Comment

by:SMPAR2
ID: 34905284
I will investigate and see if that is the problem.
I will move the server to an other switch and change the cable again as a test.
I will come back to you with the result.
Thank you for your help
Serge
0
 

Author Comment

by:SMPAR2
ID: 34905360
Hello,
I connected the Guest Windows 2003 virtual server having the problem to the onboard NIC card (other physical nic on the hyper-v host) connected the server to an other switch and used a new cat6 cable and still the same problem!!!!
0
 
LVL 2

Expert Comment

by:storkyIV
ID: 34905388
Ok, So you have multiple nics - have you tried mapping a different nic to that particular virtual machine?
0
 

Author Comment

by:SMPAR2
ID: 34905655
Yes I connected the cable to the onboard NIC (Before it was on an extra multi port NIC), and on the Hyper-Guest map the VM to this other NIC. I connected as well with a new cable to a phisicaly different switch.
0
 

Accepted Solution

by:
SMPAR2 earned 0 total points
ID: 35066940
Thank you all for your help.
I found the solution:
http://techblog.mirabito.net.au/?p=142

CPU sync problem  !!!!
0
 

Author Closing Comment

by:SMPAR2
ID: 37775641
Resolve the problem
0

Featured Post

Learn how to optimize MySQL for your business need

With the increasing importance of apps & networks in both business & personal interconnections, perfor. has become one of the key metrics of successful communication. This ebook is a hands-on business-case-driven guide to understanding MySQL query parameter tuning & database perf

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

From Coral's  "So You Want To Play With Computers" Series A bit of background first, so this story will make a little sense. One day, probably because he needed a good laugh, Finagle hooked me up with a church to upgrade/run their Media Booth.…
Nowadays, Virtual Machines are used equally by small and large scale organizations. However the issue is that VMDK files are also prone to corruption. So, in this article we are looking at how to recover VMDK files from hard disk of host operating s…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses
Course of the Month12 days, 20 hours left to enroll

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question