Solved

auditpol - to see what is the current setting

Posted on 2011-02-16
2
580 Views
Last Modified: 2012-05-11
when i tried auditpol command as below to see if the "directory service changes" is Yes or No, i only get it was successfully executed.

C:\Users\jimwe>auditpol /set /subcategory:"directory service changes"
The command was successfully executed.

can you check if it is enabled or not from command line? what exactly happened with my command above?

thanks
0
Comment
Question by:anushahanna
2 Comments
 
LVL 5

Accepted Solution

by:
jason987 earned 500 total points
ID: 34910941
You didn't do anything with that command because you did not add on the switches to change the values.  (/success:enable /failure:enable etc...)

Easiest way (and best because you have a backup) to view all of the settings is to backup all of the settings and then just view them in notepad:

Run from an elevated command prompt.

auditpol /backup /file:auditpolicy.txt

Open in new window


More reading:

http://support.microsoft.com/kb/921469
0
 
LVL 6

Author Comment

by:anushahanna
ID: 34916505
thanks Jason.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
New Windows 7 Installations take days for Windows-Updates to show up and install. This can easily be fixed. I have finally decided to write an article because this seems to get asked several times a day lately. This Article and the Links apply to…
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…

803 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question