Solved

How to add DMZ'ded wireless

Posted on 2011-02-16
1
344 Views
Last Modified: 2013-12-27
Hi all

I am trying to add a seperate wireless network intended for guests. It must be in a seperate network and I must have the ability to bandwidth-limit the guests. The wireless guests should be able to access the internet.

At the moment I am running a smoothwall express firewall and a standard cisco aironet. I have a mangemed 24 port netgear and have a seperate Acess point for this purpose.

I was thinking of using something like untanlged or a seperate firewall in place for the wireless clients but this seems overkill.

I would normally put the access point in a DMZ but I need the bandwidth limiting ability.

Any ideas?
0
Comment
Question by:alexanderfoti
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 1

Accepted Solution

by:
alexanderfoti earned 0 total points
ID: 34965584
I acomplished this by adding a second monowall firewall inside my network and using captive portal on this.
0

Featured Post

Is your NGFW recommended by NSS Labs?

Ours is! NSS Labs Next Generation Firewall Test gives the WatchGuard Firebox M4600 a "Recommended" rating! Curious where your NGFW landed on the  Security Value Map? See the map and download the full report today!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When it comes to security, there are always trade-offs between security and convenience/ease of administration. This article examines some of the main pros and cons of using key authentication vs password authentication for hosting an SFTP server.
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this video we outline the Physical Segments view of NetCrunch network monitor. By following this brief how-to video, you will be able to learn how NetCrunch visualizes your network, how granular is the information collected, as well as where to f…
Suggested Courses

728 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question