?
Solved

Can't access Pix515e PDM through IE8

Posted on 2011-02-17
8
Medium Priority
?
1,228 Views
Last Modified: 2012-05-11
Hi All,

I have a PIX515e which I used to access through the PDM from an old XP client. That client has now failed and I am trying to regain control over my PIX through the PDM from this new machine, however I can't get the PDM do load, it just hangs at the "Device Manager Information Window"
I have installed Java version 6 which I know is not the recomended (1.4.2 is recommended) however I can't locate this older version.

Can anyone offer any advice? I know I need to update the PDM version to a later version, but until I can get into the PDM this isn't going to be an option.

Help greatly appreciated..
0
Comment
Question by:wifiit
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
  • 2
  • +1
8 Comments
 
LVL 35

Accepted Solution

by:
Ernie Beek earned 668 total points
ID: 34915494
0
 
LVL 33

Assisted Solution

by:MikeKane
MikeKane earned 668 total points
ID: 34916824
Java 1.4.2 is in the Oracle archives.    Right here:
http://java.sun.com/products/archive/j2se/1.4.2/index.html

0
 

Author Comment

by:wifiit
ID: 34916875
Thanks for that Mike.. I will give it ago with that.

Ernie:
I might have to do an upgrade through the CLI but I was hopeing I would be able to make the changes I need to make now, and upgrade at my leisure.
0
Ransomware Attacks Keeping You Up at Night?

Will your organization be ransomware's next victim?  The good news is that these attacks are predicable and therefore preventable. Learn more about how you can  stop a ransomware attacks before encryption takes place with our Ransomware Prevention Kit!

 
LVL 35

Expert Comment

by:Ernie Beek
ID: 34916972
Figures. Well first try the 1.4.2. Let's hope that works out for you.
0
 
LVL 57

Assisted Solution

by:Pete Long
Pete Long earned 664 total points
ID: 34917999
0
 
LVL 33

Expert Comment

by:MikeKane
ID: 34919372
Pete, you and your Wiki make me jealous.   I'll have to make my own one day....  :)
0
 
LVL 35

Expert Comment

by:Ernie Beek
ID: 34919764
Right Mike :-~

Pete! where can I get one?

Great stuff :)
0
 
LVL 57

Expert Comment

by:Pete Long
ID: 34932616
Cheers Gents! I used to keep all that stuff in a little access database, but then I decided if I put it on-line so my colleagues and clients could use it - then it started to make me a few quid in advertising - now it covers my Vodka intake <lol>

There are some handy tools in there - I saw Mike recommending canyouseeme.org to a poster the other day, and thought "I've got to get me one of those"
that's where this came from http://www.petenetlive.com/KB/Article/0000393.php so I'm always looking at stuff to make it better - If ever you think of something, or see something  - then hit one of the contact links and let me know and I'll add it to the list of stiff to do :)

Pete
0

Featured Post

Industry Leaders: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Suggested Courses

800 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question