Solved

asus motherboard

Posted on 2011-02-17
6
387 Views
Last Modified: 2012-08-13
i got an asus 97p55d, when i reboot the computer, after the raid screen, i got a black screen a nothing continu

to solve the problem i have to keep press f8 after the raid screen to get the windows startup menu and to choose start windows normally

how can i solve this problem
0
Comment
Question by:GCI_SUPPORT
  • 3
  • 3
6 Comments
 
LVL 34

Expert Comment

by:Paul MacDonald
ID: 34916832
How long have you waited after the screen goes black to see if something eventually comes up?  Try giving it a minute (or three) to see if anything happens.  Barring that, you can try updating your video card drivers (or rolling them back, if this is a relatively recent problem).
0
 

Author Comment

by:GCI_SUPPORT
ID: 34917014
i got the problem since i got the board, for some reason we decide to keep it this way, if i let the computer running 3 , 10 minutes even 24 hours nothing change

can it be a bios problem ?
0
 
LVL 34

Accepted Solution

by:
Paul MacDonald earned 500 total points
ID: 34917099
Hmm.   I'd probably start with running an SFC /scannow from the command prompt in windows, then I'd look at updating the video card drivers.  That's just scratching the surface though, because it could be any driver for any device that's causing it to hang.  You might want to go through each device in Device Manager and update them all.
0
Problems using Powershell and Active Directory?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

 

Author Comment

by:GCI_SUPPORT
ID: 34917477
on the sfc found no violation
now i will try the card driver
0
 

Author Comment

by:GCI_SUPPORT
ID: 34917699
you were right
thank man
you save my life
0
 
LVL 34

Expert Comment

by:Paul MacDonald
ID: 34917711
No problem - happy to help.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

INTRODUCTION The purpose of this document is to demonstrate the Installation and configuration of the Data Protection Manager product. Note that this demonstration was prepared on the basis of Windows OS is 2008 R2 and DPM 2010. DATA PROTECTI…
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Windows 8 comes with a dramatically different user interface known as Metro. Notably missing from the new interface is a Start button and Start Menu. Many users do not like it, much preferring the interface of earlier versions — Windows 7, Windows X…
With the advent of Windows 10, Microsoft is pushing a Get Windows 10 icon into the notification area (system tray) of qualifying computers. There are many reasons for wanting to remove this icon. This two-part Experts Exchange video Micro Tutorial s…

825 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question