Solved

Uninstall Untangle Server

Posted on 2011-02-17
5
766 Views
Last Modified: 2012-05-11
I have an Untangle server that is Bridged internet filter.  Connected between firewall/router (monowall - 192.168.25.254) and internal switch.  The two interfaces act as a bridge and all traffic going across the "wire" is scanned.  I need to uninstall the server.  Can I simply unplug the untangle server or do I need to reconfigure anything.
0
Comment
Question by:rtroia
  • 3
5 Comments
 
LVL 22

Expert Comment

by:Rick Hobbs
ID: 34917234
If it is a bridge  and the IP address is the same on both sides of the Untangle unit, you should be able to just unplug it.
0
 

Author Comment

by:rtroia
ID: 34917306
That's what i would think, but when I do that i have no internet.
0
 

Accepted Solution

by:
rtroia earned 0 total points
ID: 35189056
We ended up replacing the untangle.
0
 

Author Closing Comment

by:rtroia
ID: 35225252
Could not find a work around
0
 

Expert Comment

by:L_Lord
ID: 36142625
The ip can not be the same on the untangle bridge. They haven to be at least one number different .  You will have to set the machine ip back to what ever you had the untangle bridge set to.
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
ASA Troubleshooting: Easy way to determine an interface's next hop 18 73
Cisco Access point 6 87
Forwarding web requests to different web servers 15 115
Unifi AP 4 73
Let’s list some of the technologies that enable smooth teleworking. 
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question