Solved

Cannot print from Unix to Windows

Posted on 2011-02-18
3
827 Views
Last Modified: 2012-10-31
Hi all. I am trying to set a Unix Print Queue on a Windows Server 2003 machine. I have added the Windows Component for Print Services for Unix and The TCP/IP Print Server service is running. The share name and queue name are the same. I have tried to configure the port using both Raw and LPR protocols. Here is the System error that it generates when attempting the test:

Event Type:      Warning
Event Source:      LPDSVC
Event Category:      None
Event ID:      4008
Date:            2/18/2011
Time:            1:15:43 PM
User:            N/A
Computer:      JAXN1014
Description:
Printer \\172.21.4.99\wombat specified in the request from 172.21.0.254 does not exist: request ignored.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.


0
Comment
Question by:entint
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 16

Expert Comment

by:Shaik M. Sajid
ID: 34929946
0
 

Accepted Solution

by:
entint earned 0 total points
ID: 35032281
I had to change the protocal of the port to use LPD. Microsoft could not even figure it out. LOL
0
 

Author Closing Comment

by:entint
ID: 38552017
Resolved on my own
0

Featured Post

Building an interactive eFuture classroom

Watch and learn how ATEN provided a total control system solution including seamless switching matrix switch, HDBaseT extenders, PDU, lighting control to build an interactive eFuture classroom.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Connecting two servers 30 92
Generate HTML report about DHCP server 2003 1 61
Ping general failure windows 7 5 127
Connect remotely to SQL Server DB without TCP/IP enabled? 2 66
Article by: rfc1180
The Maximum Segment size (MSS) is an important consideration when troubleshooting connectivity via the Internet/Intranet. As the packets are routed via the Internet/Intranet, the packets must traverse through multiple routers in the path between two…
Recently, I had the need to build a standalone system to run a point-of-sale system. I’m running this on a low-voltage Atom processor, so I wanted a light-weight operating system, but still needed Windows. I chose to use Microsoft Windows Server 200…

737 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question