Solved

setting up wireless lan for hp prolaint ml 350 g6

Posted on 2011-02-21
4
448 Views
Last Modified: 2012-05-11
Dear Experts:

I am having a setup of 40 computers as of now no server but the network is wireless( with 06 access points) and internet is wifi, now management  decided to install the server with the centos ( samba domain controller) hence have placed the order for Hp Proliant ML 350 G6 server. please tell me is there any additional device required to purchase for this server so that all the desktops/laptops to be configured as client to the server. if need to purchase please suggest what to be purchased to setup a wireless lan ( want to make desktops /laptops as a client to the server)
Thanks in advance.
0
Comment
Question by:D_wathi
  • 2
  • 2
4 Comments
 
LVL 7

Expert Comment

by:DIIRE
Comment Utility
A little more information would be helpful.

How do you have the current wireless network configured?

E.G. Do you have one wireless router setup as a base station and the rest setup as repeaters or are they all physically linked via ethernet?

What make/model are the wireless access points?

How is DHCP currently being handled?  You will need to disable it on the wireless.
0
 

Author Comment

by:D_wathi
Comment Utility
Thank you very much for the reply, 06 access points of model DWL-2100AP WIRELESS 108GB ACESS are placed in the office, all the access points are terminated to the fast ethernet switch and dhcp is disabled, as said in the previous post until now no server now we have placed an order to purchase the server but server does not come with wireless support hence i think need to purchase the additional hardware , please suggest me what all hardware is required to setup a server so that desktops/laptops can be configured to  server as a clients. Thank you.
0
 

Author Comment

by:D_wathi
Comment Utility
Sir, is it suggested to connect the server to the switch where all the access points have got terminated then the server can be accessible to all the desktops/laptops. Please suggest.
0
 
LVL 7

Accepted Solution

by:
DIIRE earned 500 total points
Comment Utility
Yes that's right - connect the server to the switch.

You won't need to buy any new hardware.

0

Featured Post

6 Surprising Benefits of Threat Intelligence

All sorts of threat intelligence is available on the web. Intelligence you can learn from, and use to anticipate and prepare for future attacks.

Join & Write a Comment

Last Mile Wireless The term last mile wireless is a bit deceptive as it can be much more than a mile. It is also called WiMax and 802.16. It generally refers to relatively short distance point-to-point / point-to-multipoint secure wireless connecti…
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
This Micro Tutorial will show you how to maximize your wireless card to its maximum capability. This will be demonstrated using Intel(R) Centrino(R) Wireless-N 2230 wireless card on Windows 8 operating system.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

10 Experts available now in Live!

Get 1:1 Help Now