Solved

Upgrade from  Cisco Pix 506 to Pix 515e

Posted on 2011-02-21
2
485 Views
Last Modified: 2012-05-11
I currently have a Cisco pix 506 in production running version 6.3.  I'm trying to upgrade to a Cisco 515e with an unrestricted license running version 8.0(4) .  I'm trying to move my  vpn configuration over and I'm getting errors on the sysopt connection permit-pptp and sysopt connecion permit-l2tp commands.  I understand some changes were made from version 6 to 7 but every time I open the cisco document it freezes up.  Any help would be greatly appreciated.  
0
Comment
Question by:rogue028
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 25

Accepted Solution

by:
Ken Boone earned 250 total points
ID: 34945823
The 7.x code and above no longer supports the pptp connections terminating on the ASA.  It does support l2tp.  Here is a doc that shows how it supports the l2tp connection:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807213a7.shtml
0
 

Author Closing Comment

by:rogue028
ID: 34946089
Thank you very much.
0

Featured Post

2017 Webroot Threat Report

MSPs: Get the facts you need to protect your clients.
The 2017 Webroot Threat Report provides a uniquely insightful global view into the analysis and discoveries made by the Webroot® Threat Intelligence Platform to provide insights on key trends and risks as seen by our users.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you thought ransomware was bad, think again! Doxware has the potential to be even more damaging.
Encryption for Business Encryption (https://en.wikipedia.org/wiki/Encryption) ensures the safety of our data when sending emails. In most cases, to read an encrypted email you must enter a secret key that will enable you to decrypt the email. T…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question