Page_Fault_in_non paged_area

I did a fresh install of Win7 Home Premium X64 (4GB RAM) on HP PC model m8300f which has ECS motherboard MCP61PM-4M(nettle2). Basically, I do not have any software installed but the PC started going into blue screen with error message "Page_Fault_in_non paged_area". I have brandnew 4GB of memory (1x4 PC2-6400) mem ram installed. At one time PC will boot fine and another time it will bluescreen upon restarting. Bluescreen will happens when you reboots the system.
Can someone tell me how to resolve this issue. I did have the same bluescreen issue before I decided to do a fresh install hoping that it will resolve that but it did not.
Who is Participating?
ColesNetConnect With a Mentor Author Commented:
I changed the memory in my PC from PC2-6400 to all PC2-5300 and the BSOD stopped. I think the brand of memory ( Talent Memory) had a voltage which my mobo did/could not support. Amazingly, I had checked the specs of my mobo and it did specify that I could go with PC2-5300, or PC-6400. Anyway, after downgrading the memory, PC is very stable now. Thanks for all your advise.
ded9Connect With a Mentor Commented:
Upload the .dmp files which is located in your windows folder. (minidump)

NEW Internet Security Report Now Available!

WatchGuard’s Threat Lab is a group of dedicated threat researchers committed to helping you stay ahead of the bad guys by providing in-depth analysis of the top security threats to your network.  Check out this quarters report on the threats that shook the industry in Q4 2017.

i suggest to run memtest to test the ram, and test the disk too, to be sure about the basics
best download ubcd - it has all diags you need  :      
post results!
ColesNetAuthor Commented:
Run Diagnostics test with PC CHECK and all hardware (Ram, HD, Motherboard, System Stress, Video etc) passed. Going to ensure that all drivers and windows updates are all up to date. Will also upload the dump files as suggested by ded9. Will keep all updated soon.
nobusConnect With a Mentor Commented:
you can use the free drivereasy for that :
ColesNetAuthor Commented:
Below is the dump file that came up after one of thos BSOD.
Problem Event Name:      BlueScreen
  OS Version:      6.1.7600.
  Locale ID:      1033

Additional information about the problem:
  BCCode:      1a
  BCP1:      0000000000000403
  BCP2:      FFFFF6800000D040
  BCP3:      D770000094DDE867
  BCP4:      FFFFF6800000D222
  OS Version:      6_1_7600
  Service Pack:      0_0
  Product:      768_1

Files that help describe the problem:
Upload the 022211-18829-01.dmp file over here for analysis.

ColesNetAuthor Commented:
Used a different type of memory and had my BSOD issued resolved.
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.