Solved

Cisco 1340AP MAC address filtering

Posted on 2011-02-22
8
669 Views
Last Modified: 2012-05-11
A clients Cisco 1340AP has been configured for MAC address filtering. I have the username and password to configure the device and I also know that the following information:

Access list 701 = allowed MAC addresses
Access list 702 = blocks all other MAC addresses

However, how do I add additional MAC addresses to Access list 701? I can't find the relevant menu on the GUI.

Please help
0
Comment
Question by:the_omnific
  • 5
  • 3
8 Comments
 
LVL 34

Expert Comment

by:Istvan Kalmar
ID: 34949546
0
 
LVL 1

Author Comment

by:the_omnific
ID: 34949996
Ok, seeing as though the MAC address im trying to add is 78:CA:39:72:93:AC

To clarify, the command is:

access-list 701 permit 78CA.3972.93AC

Is this correct?
0
 
LVL 1

Author Comment

by:the_omnific
ID: 34950289

In addition to this, how do I list the MAC addressed currently in access-list 701 ?
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 
LVL 34

Accepted Solution

by:
Istvan Kalmar earned 500 total points
ID: 34950355

    access-list 701 permit 78CA.3972.93AC 0000.0000.0000

show access-list 701 tells the list of ACL 701
0
 
LVL 1

Author Comment

by:the_omnific
ID: 34950518
Cisco#access-list 701 permit 78ca.3972.93ac 0000.0000.0000
                       ^
% Invalid input detected at '^' marker.

Any ideas?

The command 'show access-list 701' works fine though so thanks for that.
0
 
LVL 1

Author Comment

by:the_omnific
ID: 34950522
The marker is below the 'l' in list not the '-'
0
 
LVL 1

Author Comment

by:the_omnific
ID: 34950591
Ignore that :)
0
 
LVL 34

Expert Comment

by:Istvan Kalmar
ID: 34950650
conf t
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Short answer to this question: there is no effective WiFi manager in iOS devices as seen in Windows WiFi or Macbook OSx WiFi management, but this article will try and provide some amicable solutions to better suite your needs.
Exchange server is not supported in any cloud-hosted platform (other than Azure with Azure Premium Storage).
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

808 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question