Solved

SSL VPN Works - LImited protocol options in the address bar

Posted on 2011-02-22
6
369 Views
Last Modified: 2012-08-14
We set up a SSL VPN connection to a Cisco 5505 Router (ver 8.2.x). When you connect, all looks as it should, however the address bar is limited to HTTP and FTP, no RDP and RDP2 options are available.

Any suggestions? It's normally there by default from past experience.

Thanks
0
Comment
Question by:gcastong
  • 5
6 Comments
 
LVL 57

Expert Comment

by:Pete Long
Comment Utility
you need to import the java applets to get those options :)
0
 
LVL 57

Accepted Solution

by:
Pete Long earned 500 total points
Comment Utility
here's where you upload them


asdm.JPG
0
 

Author Closing Comment

by:gcastong
Comment Utility
Awesome, quick and simple.
0
Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

 
LVL 57

Expert Comment

by:Pete Long
Comment Utility
0
 
LVL 57

Expert Comment

by:Pete Long
Comment Utility
0
 
LVL 57

Expert Comment

by:Pete Long
Comment Utility
ThanQ
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Suggested Solutions

Have you experienced traffic destined through a Cisco ASA firewall disappears and you do not know if the traffic stops in the firewall or somewhere else? The solution is the capture feature. This feature was released in 6.2(1) and works in all firew…
Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now