vburshteyn
asked on
mpls/cisco ASA
Hi folks,
At the current time i have the following set up on the mpls network
router ---> asa 5510 --> switch.
Router
Public IP == internet
172.17.20.1 ------> 172.17.20.2 Cisco ASA (to internal switch) 172.17.30.1
This is working via double NAT. Is there a better way to do this?
Thanks,
At the current time i have the following set up on the mpls network
router ---> asa 5510 --> switch.
Router
Public IP == internet
172.17.20.1 ------> 172.17.20.2 Cisco ASA (to internal switch) 172.17.30.1
This is working via double NAT. Is there a better way to do this?
Thanks,
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.