Network traffic solutions

Posted on 2011-02-24
Medium Priority
Last Modified: 2012-08-14

I have a network with around 120 components (workstation, servers, routers - use to create VPN between office location) I want to create trafiic report for all components (filter by ip, destination ip, used protocol, used software). I want to be able to see who generate traffic on my network and also what type of software use: torrent, dc++, streaming .... I can't use proxy server because I have mutiple location and each location have own gateway for internet.

Can someone tell me one or more solution (if is possible free) to rich this objective, if is need to instal a client on workstation is okay but is important to use one server to report network traffic.

I try to use demo version from SolarWinds but I can't set up. We have linksys router between offices.

Thanks for any suggestions
Question by:Syberye
  • 3
LVL 11

Expert Comment

by:Kruno Džoić
ID: 34969753

Author Comment

ID: 35014914
I have LinkSys routers. I don't have netflow or I don't know how to enabled.
LVL 21

Expert Comment

ID: 35016778
If you can mirror the router's LAN port to a PC running Wireshark, go into the statistics section and then conversations and it will give you a look at who is doing what and what volume of data they are moving.

You can sort by the various columns to get an idea of what is using the most bandwidth etc.
You can copy that information into a spreadsheet if you want.

I know it doesn't make a nice graphical report but it is a quick and cheap look at your top talkers etc.

Accepted Solution

Syberye earned 0 total points
ID: 35414725
We don't find any good solution. In the and we buy a program which have the own agent which we instal on each station.

Author Closing Comment

ID: 35452243
Not what realy search

Featured Post

Choose an Exciting Career in Cybersecurity

Help prevent cyber-threats and provide solutions to safeguard our global digital economy. Earn your MS in Cybersecurity. WGU’s MSCSIA degree program was designed in collaboration with national intelligence organizations and IT industry leaders.

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

In this article, the configuration steps in Zabbix to monitor devices via SNMP will be discussed with some real examples on Cisco Router/Switch, Catalyst Switch, NAS Synology device.
In this article I will be showing you how to subnet the easiest way possible for IPv4 (Internet Protocol version 4). This article does not cover IPv6. Keep in mind that subnetting requires lots of practice and time.
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Monitoring a network: why having a policy is the best policy? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the enormous benefits of having a policy-based approach when monitoring medium and large networks. Software utilized in this v…

586 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question