Solved

Assigned Applications from a Windows 2008 server to Windows 7 clients

Posted on 2011-02-25
11
1,508 Views
Last Modified: 2012-05-11
Good evening experts :)

I am attempting to deploy autodesk software to Windows 7 clients. The .msi files have been created using Autodesk documentation to work with gpo deployment. Everything works on a virtual Windows 7 test computer. The install does not work in the production enviroment.
gpresult shows that the gpo has been applied. gpresult /z shows that the application information is correct. I can access and install the software without problems. Authenticated users (and a test user's computer account) have been granted modify permissions to the deployment folder.
I'm running out of ideas. The policy is applying, the information is correct, they have permissions to the folder, and it works in my test enviroment.
(The domain level is windows 2000)


Software Installations
----------------------
GPO: EEWS Assigned Autodesk Programs
Name: Autodesk Revit MEP 2011 x64
Version:10.3
Deployment State: Assigned
Source: \\server\Deployment\Autodesk\Revit\Revit MEP 2011\AdminImage\RevitSetup\RevitMEP\Autodesk Revit x64.msi
AutoInstall:True
Origin: Applied Application

GPO: EEWS Assigned Autodesk Programs
Name: Autodesk Revit Structure 2011 x64
Version:10.3
Deployment State: Assigned
Source: \\server\Deployment\Autodesk\Revit\Revit Structure 2011\AdminImage\RevitSetup\RevitStructure\Autodesk Revit x64.msi
AutoInstall:True
Origin: Applied Application
0
Comment
Question by:ezmicro
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 8
  • 2
11 Comments
 
LVL 74

Expert Comment

by:Glen Knight
ID: 34986095
If you manually run the command the GPO will execute in the production environment does the install go through?
0
 
LVL 15

Expert Comment

by:markdmac
ID: 34986785
Are you assigning the GPO to the users or the computers?
0
 
LVL 1

Author Comment

by:ezmicro
ID: 34997326
I am assigning the software to computers. I'm not sure if there is a command that i can run. I assigned an msi and added 2 mst modifiers.
0
Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

 
LVL 15

Expert Comment

by:markdmac
ID: 34998979
And you have rebooted the PCs?
0
 
LVL 1

Author Comment

by:ezmicro
ID: 34999835
Yes. And the policies are properly being applied to the computers. I clicked on "redeploy package" in group policy during my tests in case it believed the software was already installed.
0
 
LVL 1

Author Comment

by:ezmicro
ID: 35021026
The policy is listed under applied group policy objects under computer settings. Is there a way that i can see why it isn't installing?
0
 
LVL 1

Author Comment

by:ezmicro
ID: 35028901
When i run RSOP i see orange triangles with (!) in them on the applications.

Client system log errors:

The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the next startup or logon for this user, and this may result in slow startup and boot performance.

Failed to apply changes to software installation settings.    The error was : %%1274

0
 
LVL 1

Author Comment

by:ezmicro
ID: 35029664
gpresult /h gpreport.html output:

Software Installation status: Pending


Software Installation did not complete policy processing because a system restart is required for the settings to be applied. Group Policy will attempt to apply the settings the next time the computer is restarted.
0
 
LVL 1

Author Comment

by:ezmicro
ID: 35031892
gpsvc.log output:


GPSVC(478.5d8) 16:46:41:841 Waiting for connectivity before applying policies
GPSVC(478.5d8) 16:46:45:441 Waiting for NlaSvc failed with 0x0
GPSVC(478.5d8) 16:46:45:461 NlaOpenQuery failed with 0x6ba
GPSVC(478.5d8) 16:46:46:961 ProcessGPOs: MyGetUserName failed with 1355.
GPSVC(478.5d8) 16:46:46:971 NlaOpenQuery failed with 0x6ba
GPSVC(478.5d8) 16:46:46:981 NlaRegisterQuery failed with 0x6ba
GPSVC(478.5d8) 16:46:46:981 NlaRegisterQuery failed with 0x6ba
GPSVC(478.e5c) 16:50:14:273 CExtSessionLogger::Log: Didn't find an instance of the extension object when trying to set the dirty flag.
0
 
LVL 1

Accepted Solution

by:
ezmicro earned 0 total points
ID: 35084884
I posted in a group policy forum and resolved the issue.

The poster Brent Hu asked me to adjust a setting.

This problem may occur if the Group Policy engine or Active Directory times out while it waits for the network to start.

Please try to enable "Computer Configuration > Policies > Administrative Templates > System > Group Policy > Startup policy processing" and change amout to wait (in seconds) to 60. Setting the value larger than the minimum value of 30 is recommended. To work for your configuration, define the value of 60, and then increase the value until the problem is resolved.

http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/2aeafc77-1f7c-4d3a-9cdb-0dc14b2c1191
0
 
LVL 1

Author Closing Comment

by:ezmicro
ID: 35126311
Issue was resolved in another forum.
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

This article describes my battle tested process for setting up delegation. I use this process anywhere that I need to setup delegation. In the article I will show how it applies to Active Directory
Auditing domain password hashes is a commonly overlooked but critical requirement to ensuring secure passwords practices are followed. Methods exist to extract hashes directly for a live domain however this article describes a process to extract u…
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…
Are you ready to implement Active Directory best practices without reading 300+ pages? You're in luck. In this webinar hosted by Skyport Systems, you gain insight into Microsoft's latest comprehensive guide, with tips on the best and easiest way…

732 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question