Solved

Setting up Hyper V failover on SAN

Posted on 2011-02-26
3
743 Views
Last Modified: 2012-05-11
I have setup 2 Windows 2008 R2 Servers with Hyper V.  I am working on setting up Failover Clustering, and have passed the validation tests on both successfully.  They are both connected to a Dell AX150 fiber SAN.  I am not sure exactly what the process is to setup a Quorum disk, or any method to share a disk between 2 servers.  At this point, I have assigned disks to both servers from the SAN, and can access them.  What do I need to do to create, assign, and access shared storage for the failover to work?
0
Comment
Question by:B1izzard
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
3 Comments
 
LVL 13

Accepted Solution

by:
lciprianionut earned 250 total points
ID: 34989076
0
 
LVL 13

Assisted Solution

by:upalakshitha
upalakshitha earned 250 total points
ID: 34990041
0
 

Author Closing Comment

by:B1izzard
ID: 35047385
Thanks.  The links were helpful.  I eventually got it working.
0

Featured Post

Best Practices: Disaster Recovery Testing

Besides backup, any IT division should have a disaster recovery plan. You will find a few tips below relating to the development of such a plan and to what issues one should pay special attention in the course of backup planning.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

A safe way to clean winsxs folder from your windows server 2008 R2 editions
This article explains how to install and use the NTBackup utility that comes with Windows Server.
This tutorial will show how to push an installation of Backup Exec to an additional server in both 2012 and 2014 versions of the software. Click on the Backup Exec button in the upper left corner. From here, select Installation and Licensing, then I…
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

737 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question