Solved

How to Open a New Session To RDS Session Host instead of Reconnecting to an Existing Session?

Posted on 2011-02-27
14
1,150 Views
Last Modified: 2013-11-21
Dear Sir,

I have 3 RDS (Session Host Servers ) Win 2008 R2.
Those Servers are configured as NLB cluster, multicast using one Virtual IP Address.
All servers are joined to the domain controller.
I am using one user name in AD to connect to the RDS Servers from 300 Thin Clients.
Identical application is installed on those RDSs.

I have an issue that when I reboot all the Thin Clients and attempt to log on.
I am receiving the following message in grey WINDOW:

Windows Log On:
Select an existing session to reconnect....

many sessions are listing with different time...

I don't want to reconnect to an existing session, I need to open each time a new session to the RDS.
This is an exam class, I don't want the reconnect message appears to the students to choose which session they need to log on.

I already configured under RD Session Host Configuration, End a disconnected session after 1 minute.

Please I need help.

Thank You!
0
Comment
Question by:ISC-IT-Admin
  • 7
  • 7
14 Comments
 
LVL 21

Accepted Solution

by:
dan_blagut earned 500 total points
ID: 34995827
Hello

A quick solution is to use one compte for each thin terminal. Or accept to reconnect only from originating IP (in ADUC).

Dan
0
 
LVL 1

Author Comment

by:ISC-IT-Admin
ID: 34995911
Hello Dan,

Thank you for the reply...

Sorry I didn't understand what u mean is to use one compte for each thin terminal. Or accept to reconnect only from originating IP (in ADUC)????
Could you please give me more details...

For "Restrict Each user to Single Session" is configured to NO...

0
 
LVL 1

Author Comment

by:ISC-IT-Admin
ID: 34995944
Hello Dan,

I found "Allow Reconnecting From Originating Client Only" in ADUC.
Please find attached screen shot, correct?

What about use one compte for each thin terminal???

Thanks.
Student.JPG
0
 
LVL 21

Expert Comment

by:dan_blagut
ID: 34998536
Well I think is more accurate if you create an account for each terminal like student1 to studentn, with same password or not. That will resolve your problem (each user will see only one connexion).
And in a other approach you can set "end a disconnected session" to 5 min. That will kill all session deconnected session, so you will have less sessions active.
Anyway I think the multiple user is best option.

Dan
0
 
LVL 1

Author Comment

by:ISC-IT-Admin
ID: 35004109
Hi Dan,

Thank you for the reply.

In fact, It's difficult to create 310 users...
I'm using those terminals for one purpose application.
It's quite difficult to go to each terminal and change to a new username...
When the TC reboot, it log on automatically to the RDS server, without user(student) interaction.
However, I'm using "end a disconnected session" to 1 min...
Is there any way to kill the session immediately less than 1 min?
What about "Allow Reconnecting From Originating Client Only" in ADUC, it will reconnect only for the client whose IP match?

Regards,

-Charbel-
 
0
 
LVL 21

Expert Comment

by:dan_blagut
ID: 35004545
Yes the "Allow Reconnecting From Originating Client Only" was created to list only the sessions launched from that specific terminal (not IP). If you look on the terminal server manager, for each connection you have the "client name", so I think all your thin clients had differernt names (you can look to test for 2 different connections).
And yes check the "Allow Reconnecting From Originating Client Only" option for the thin client account to see what is happen (once that you killed all disconnected sessions, you will have the message only if you had leave the TSE  disconnected and you  try a new connexion in 1 min).

Dan
 
0
 
LVL 1

Author Comment

by:ISC-IT-Admin
ID: 35004565
Hello Dan,

Thanks for the information.

Is there any way to kill any disconnected session immediately less than 1 min?
Registry or something?

Charo,
0
VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

 
LVL 21

Expert Comment

by:dan_blagut
ID: 35005574
Don't know. Did you test "Allow Reconnecting From Originating Client Only"?

Dan
0
 
LVL 1

Author Comment

by:ISC-IT-Admin
ID: 35005706
Yes, I tested and it looks fine till now...

Charo,
0
 
LVL 21

Expert Comment

by:dan_blagut
ID: 35005861
K
0
 
LVL 1

Author Comment

by:ISC-IT-Admin
ID: 35016328
Hello Dan,

I had one issue today that when I restarted one Thin Client, it login and reconnect to a different session instead of opening a new session...
Strange, I didn't have this issue before with Win 2003 TS...

Any idea?

Thanks.
0
 
LVL 21

Expert Comment

by:dan_blagut
ID: 35017061
Did you have restarted the TSE services? Maybe you still had same connexion that was created with reconnect from any IP

Dan
0
 
LVL 1

Author Comment

by:ISC-IT-Admin
ID: 35018786
No I didn't restart the Terminal Server Services :)

What is the name of TS Services under services.msc to restart them?

Thanks.
0
 
LVL 21

Expert Comment

by:dan_blagut
ID: 35018953
net stop termservice
net start termservice
0

Featured Post

Don't lose your head updating email signatures!

Do your end users still have the wrong email signature? Do email signature updates bore you or fill you with a sense of dread? You can make this a whole lot easier on yourself by trusting an Exclaimer email signature management solution. Over 50 million users do...so should you!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

If you migrate a Terminal Server licenses server inside the 2008 server family, you can takte advantage of the build-in migration tool. If you like to migrate an older 2003 Server (and the installed client CALs) to a 2008 R2 server for example, you …
I was supporting a handful of Windows 2008 (non-R2) 2 node clusters with shared quorum disks. Some had SQL 2008 installed and some were just a vendor application that we supported. For the purposes of this article it doesn’t really matter which so w…
This tutorial will show how to push an installation of Backup Exec to an additional server in both 2012 and 2014 versions of the software. Click on the Backup Exec button in the upper left corner. From here, select Installation and Licensing, then I…
This tutorial will walk an individual through locating and launching the BEUtility application and how to execute it on the appropriate database. Log onto the server running the Backup Exec database. In a larger environment, this would generally be …

930 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now