Solved

Exchange Problem after Server 2008 r2 SP1 install

Posted on 2011-02-27
6
1,223 Views
Last Modified: 2012-05-11
Our Exchange 2010 server was running fine until I installed service pack 1 for Windows Server 2008 R2. Now, we still receive E-mails fine and can connect or internal outlook and phones to the Exchange server, The only problem is that ever since the service pack 1 install our Mac Outlook 2011 cannot connect to the server(this is outside the building). I have upgraded to Exchange 2010 Service Pack 1 just to see if that would fix it and it hasn't. Below is the error that I see showing up in event logs:


WebHost failed to process a request.
 Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/8628710
 Exception: System.ServiceModel.ServiceActivationException: The service '/EWS/Exchange.asmx' cannot be activated due to an exception during compilation.  The exception message is: This collection already contains an address with scheme http.  There can be at most one address per scheme in this collection.
Parameter name: item. ---> System.ArgumentException: This collection already contains an address with scheme http.  There can be at most one address per scheme in this collection.
Parameter name: item
   at System.ServiceModel.UriSchemeKeyedCollection.InsertItem(Int32 index, Uri item)
   at System.Collections.Generic.SynchronizedCollection`1.Add(T item)
   at System.ServiceModel.UriSchemeKeyedCollection..ctor(Uri[] addresses)
   at System.ServiceModel.ServiceHost..ctor(Type serviceType, Uri[] baseAddresses)
   at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(Type serviceType, Uri[] baseAddresses)
   at System.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String normalizedVirtualPath)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(String normalizedVirtualPath)
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)
   --- End of inner exception stack trace ---
   at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)
   at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath)
 Process Name: w3wp
 Process ID: 4080
0
Comment
Question by:considerscs
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 2
6 Comments
 
LVL 49

Expert Comment

by:Akhater
ID: 34991553
Open your IIS manager and check the bindings of your default website do you have hostheaders there ? if possible share a screenshot
0
 
LVL 1

Author Comment

by:considerscs
ID: 34991591
Screenshot attached.
IIS Bindings
0
 
LVL 49

Accepted Solution

by:
Akhater earned 500 total points
ID: 34991602
see the one with hostname mail.domain.com ??? edit it and remove the hostname after that run iisreset
0
Office 365 Training for IT Pros

Learn how to provision tenants, synchronize on-premise Active Directory, implement Single Sign-On, customize Office deployment, and protect your organization with eDiscovery and DLP policies.  Only from Platform Scholar.

 
LVL 1

Author Comment

by:considerscs
ID: 34991639
Worked perfectly. Mac Outlook is now connecting to exchange server. I will award points. Thanks. I double checked the log's and now I only see the following error from me testing OWA out(this seems to be problem with Exchange SP1 upgrade).


Request for URL 'https://mail.considerscs.com/ecp/default.aspx?rfr=owa' failed with the following error:
System.TypeInitializationException: The type initializer for 'Microsoft.Exchange.Configuration.TenantMonitoring.TenantMonitor' threw an exception. ---> System.FormatException: Input string was not in a correct format.
   at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
   at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
   at System.Diagnostics.PerformanceCounterLib.GetStringTable(Boolean isHelp)
   at System.Diagnostics.PerformanceCounterLib.get_NameTable()
   at System.Diagnostics.PerformanceCounterLib.get_CategoryTable()
   at System.Diagnostics.PerformanceCounterLib.CategoryExists(String machine, String category)
   at System.Diagnostics.PerformanceCounterCategory.Exists(String categoryName, String machineName)
   at Microsoft.Exchange.Configuration.TenantMonitoring.TenantMonitor..cctor()
   --- End of inner exception stack trace ---
   at Microsoft.Exchange.Configuration.TenantMonitoring.TenantMonitor.LogActivity(CounterType counterType, String organizationName)
   at Microsoft.Exchange.Management.ControlPanel.RbacContext.CreateSession()
   at Microsoft.Exchange.Management.ControlPanel.RbacSettings.CreateSession()
   at Microsoft.Exchange.Management.ControlPanel.AuthenticationSettings..ctor(HttpContext context)
   at Microsoft.Exchange.Management.ControlPanel.RbacModule.Application_PostAuthenticateRequest(Object sender, EventArgs e)
   at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

System.FormatException: Input string was not in a correct format.
   at System.Number.StringToNumber(String str, NumberStyles options, NumberBuffer& number, NumberFormatInfo info, Boolean parseDecimal)
   at System.Number.ParseInt32(String s, NumberStyles style, NumberFormatInfo info)
   at System.Diagnostics.PerformanceCounterLib.GetStringTable(Boolean isHelp)
   at System.Diagnostics.PerformanceCounterLib.get_NameTable()
   at System.Diagnostics.PerformanceCounterLib.get_CategoryTable()
   at System.Diagnostics.PerformanceCounterLib.CategoryExists(String machine, String category)
   at System.Diagnostics.PerformanceCounterCategory.Exists(String categoryName, String machineName)
   at Microsoft.Exchange.Configuration.TenantMonitoring.TenantMonitor..cctor()
0
 
LVL 49

Expert Comment

by:Akhater
ID: 34991659
this is a different error

run cmd as administrator and switch to c:\windows\system32 run lodctr /r

when done run iisreset and try
0
 

Expert Comment

by:ksmith36
ID: 35509150
I am having the same exact problem as the original poster. I am still able to use Outlook Web Access, and I can connect with my PC running Outlook 2010. However, my Mac cannot connect running Outlook 2011.

The problem started occurring for me after upgrading our server to Server 2008 R2 SP1 and Exchange 2010 SP1. I receive the same exact error in my event log. I have attached a screenshot of my default site bindings as that seemed to be the issue for the original poster. Thanks. IIS Default Site Bindings
0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

MS Outlook is a world-class email client application that is mainly used for e-communication globally.  In this article, we will discuss the basic idea about MS Outlook, its advanced features, and types of MS Outlook File formats.
How to resolve IMCEAEX NDRs in Exchange or Exchange Online related to invalid X500 addresses.
This Micro Tutorial hows how you can integrate  Mac OSX to a Windows Active Directory Domain. Apple has made it easy to allow users to bind their macs to a windows domain with relative ease. The following video show how to bind OSX Mavericks to …
Exchange organizations may use the Journaling Agent of the Transport Service to archive messages going through Exchange. However, if the Transport Service is integrated with some email content management application (such as an antispam), the admini…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question