oloap88
asked on
catalyst 2950 problem copyng new sustem immage after "errase flash"
hi all,
i have a problem.
i recently bought a stock of 20 catalyst 2950 but some of the are completely formatted.
i tried doing this:
switch: flah_init
Unknown cmd: flah_init
switch: flash_init
Initializing Flash...
...The flash is already initialized.
switch: load_helper
switch: dir_flash
Unknown cmd: dir_flash
switch: dir flash:
Directory of flash:/
7740416 bytes available (1024 bytes used)
switch: copy xcopy:c2950-i6k2l2q4-mz.12 1-22.EA13. bin flash:c2950-i6k2l2q4-mz.12 1-22.EA13. bin
xcopy:c2950-i6k2l2q4-mz.12 1-22.EA13. bin: permission denied
switch: set
switch: ?
? -- Present list of available commands
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_param -- Set system parameters in flash
trap -- Cause a software breakpoint to occur
type -- Concatenate (type) file(s)
-- MORE --
unset -- Unset one or more environment variables
version -- Display boot loader version
switch:
but as you see it keep sayng permission denied when i do xcopy....
any idea?
i have a problem.
i recently bought a stock of 20 catalyst 2950 but some of the are completely formatted.
i tried doing this:
switch: flah_init
Unknown cmd: flah_init
switch: flash_init
Initializing Flash...
...The flash is already initialized.
switch: load_helper
switch: dir_flash
Unknown cmd: dir_flash
switch: dir flash:
Directory of flash:/
7740416 bytes available (1024 bytes used)
switch: copy xcopy:c2950-i6k2l2q4-mz.12
xcopy:c2950-i6k2l2q4-mz.12
switch: set
switch: ?
? -- Present list of available commands
boot -- Load and boot an executable image
cat -- Concatenate (type) file(s)
copy -- Copy a file
delete -- Delete file(s)
dir -- List files in directories
flash_init -- Initialize flash filesystem(s)
format -- Format a filesystem
fsck -- Check filesystem consistency
help -- Present list of available commands
load_helper -- Load and initialize a helper image
memory -- Present memory heap utilization information
mkdir -- Create dir(s)
more -- Concatenate (display) file(s)
rename -- Rename a file
reset -- Reset the system
rmdir -- Delete empty dir(s)
set -- Set or display environment variables
set_param -- Set system parameters in flash
trap -- Cause a software breakpoint to occur
type -- Concatenate (type) file(s)
-- MORE --
unset -- Unset one or more environment variables
version -- Display boot loader version
switch:
but as you see it keep sayng permission denied when i do xcopy....
any idea?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.