Solved

Intrusion Detected I1910 on Dell Server

Posted on 2011-02-28
4
7,880 Views
Last Modified: 2012-05-11
I have a Dell 2970 server, opening the cover for it to upgrade some RAM, upon turning it on afterwords it displays Intrusion Detected I1910, all the fans kick up at high speed and do not slow down even after it loads. I cannot find a setting in the BIOS to clear the Chassis Intrusion, it is just not there. I have even out the old RAM back, same issue. Does anyone know how to stop it from displaying that on the front LED and even more important how to make the fans slow back down RPM to what they are supposed to be.
Thanks!

Mike.
0
Comment
Question by:mprakhye
  • 3
4 Comments
 

Expert Comment

by:HiroshiSenga
ID: 34998669
You must find out the setting in the BIOS.
I often reset the alerm.
NO DOUBT!
0
 

Author Comment

by:mprakhye
ID: 34998680
There's no setting in the BIOS. I have managed to reset the front orange blinking light by using DSET tools, but the fans are still at very high speeds and the server administrator tells me that the chassis is open.
0
 

Accepted Solution

by:
mprakhye earned 0 total points
ID: 35130293
The pin that is supposed to be pushed down when the cover is closed has broken. That was the issue all along.
0
 

Author Closing Comment

by:mprakhye
ID: 35170924
I inserted a small piece of plastic so that the broken pin would stay down.
0

Featured Post

Why You Should Analyze Threat Actor TTPs

After years of analyzing threat actor behavior, it’s become clear that at any given time there are specific tactics, techniques, and procedures (TTPs) that are particularly prevalent. By analyzing and understanding these TTPs, you can dramatically enhance your security program.

Join & Write a Comment

Many of us need to configure DHCP server(s) in their environment. We can do that simply via DHCP console on server or using MMC snap-in on each computer with Administrative Tools installed in a network. But what if we have to configure many DHCP ser…
The 6120xp switches seem to have a bug when you create a fiber port channel when you have a UCS fabric interconnects talking to them.  If you follow the Cisco guide for the UCS, the FC Port channel will never come up and it will say that there are n…
Internet Business Fax to Email Made Easy - With eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, fr…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

744 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

11 Experts available now in Live!

Get 1:1 Help Now