Solved

Setup IE Proxy Settings to use Cisco ASA?

Posted on 2011-03-01
2
1,207 Views
Last Modified: 2012-05-11
I'm removing an old ISA server and was implementing a new ASA 5510. Right now we push out Group Policy settings to so everyone uses the ISA via the Internet Explorer's proxy settings shown in the picture. Unfortunately, if I remove the proxy settings in Internet Explorer our default routing sends everyone out an alternate path to the internet. Instead of taking the time to change all the routing for our locations can I setup the Proxy Settings under IE to go out via the Cisco ASA firewall? If so, what is this called and how may i do this on the ASA? Everything I'm reading says this can't but done. From my experience the ASA is feature rich and has never let me down.

Thank you!
Untitled.jpg
0
Comment
Question by:First Last
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 17

Accepted Solution

by:
Kvistofta earned 500 total points
ID: 35009878
It is simple: You cannot do that. The ASA doesnt have that functionality. You need to have something else operating as a proxy server and point that something out in the proxy settings, or you remove the proxy settings and let the clients access internet directly via the configured default gateway.

Best regards
Kvistofta
0
 
LVL 1

Author Closing Comment

by:First Last
ID: 35011420
I'll change my routers so for all http and ssl trafic that traffic will be sent to the new firewall.
0

Featured Post

Connect further...control easier

With the ATEN CE624, you can now enjoy a high-quality visual experience powered by HDBaseT technology and the convenience of a single Cat6 cable to transmit uncompressed video with zero latency and multi-streaming for dual-view applications where remote access is required.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
VoIP Polycom Phones not working 30 64
pfsense upgrade from 2.2.6 to 2.3.3 28 78
Cisco Switch slow_Faulty Link 7 52
Ping issue with M.M.M.M 13 37
For months I had no idea how to 'discover' the IP address of the other end of a link (without asking someone who knows), and it drove me batty. Think about it. You can't use Cisco Discovery Protocol (CDP) because it's not implemented on the ASAs.…
Many of the companies I’ve worked with have embraced cloud solutions due to their desire to “get out of the datacenter business.” The ability to achieve better security and availability, and the speed with which they are able to deploy, is far grea…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

738 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question