CLX-8385ND - SAMSUNG issue with paper source

Posted on 2011-03-02
Medium Priority
Last Modified: 2012-05-11
I have a CLX-8385ND - SAMSUNG Printer,
I use CLX-8385ND PS driver,
the driver is fantastic in order to print PDF documents,
there is an issue:
It presents problem (yellow triangle) to used second adn third tray.
I think to use the latest driver (on window xp pro):
Printer Driver Post Script 2.31 CLX-8385ND /SEE

I dont want to use the universal driver PS because it is too slow
to trasmit spool to the printer.
(the orignal PS 0 seconds, the universal 14seconds)

has somebody an idea?

Question by:bobdylan75
  • 2
LVL 39

Expert Comment

ID: 35024133
Does the printer have those trays installed? And, can you print from them? Does the driver have the correct paper size set for the trays?

Accepted Solution

bobdylan75 earned 0 total points
ID: 35024799
Thank you hdondt,
I have already resolve the issue,
I went in printer properties, instead of printer preferences,
and there I clicked all the fields (without to change them, because they were already correct),
so I pressed apply,
Then I went in printer preferences and then the issue was gone:No more yellow triangle on the trays...
This happens in all the PCs in my network  (with Windows XP Pro).

Author Closing Comment

ID: 35067760
and thank you,

Featured Post

Free Tool: IP Lookup

Get more info about an IP address or domain name, such as organization, abuse contacts and geolocation.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

Join & Write a Comment

The article explains the protocols and technology which is involved when two computers on different TCP/IP networks communicate with each other. In the diagram, a router is used to segregate two networks. The networks are and 192…
This tutorial is intended to teach the basics of 3-D Modeling using TinkerCad.com as the Computer Aided Drafting software. Once complete this model can be 3D printed.
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
Please read the paragraph below before following the instructions in the video — there are important caveats in the paragraph that I did not mention in the video. If your PaperPort 12 or PaperPort 14 is failing to start, or crashing, or hanging, …

607 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question