Solved

Cisco 6513 / 7609 Modules vs. Slots

Posted on 2011-03-02
6
1,383 Views
Last Modified: 2013-11-05
I can do a "show modules" which gives me module numbers.  Is there a relationship between the module number and the slot?  How can I tell which slot a given module is installed into? Thanks!
0
Comment
Question by:MajorBigDeal
  • 3
  • 3
6 Comments
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 35023936
Up to the number of physical slots, a show mod will correlate to the slot number. Module numbers greater than the slot number is a virtual slot.

For example, in the hybrid mode 6513 the supervisor was installed in slot 1. And it displayed as module 1. The MSFC was installed on the supervisor yet displayed as module 15.

Another command that you can use is "show inventory".
0
 
LVL 11

Author Comment

by:MajorBigDeal
ID: 35031890
Thanks I ran the show inventory - I guess what I am really trying to do is identify if there are any open slots (without driving out to physically look at it).  Is there a command that will do that? I did a show ver and it is a WS-C6513.  I tried to google how many slots it would have but it isn;t clear to me how to tell.  Thanks again for your help.
0
 
LVL 50

Expert Comment

by:Don Johnston
ID: 35031960
On the 6500's, the last two digits indicate how many slots. i.e. 6506 has six slots. 6509 has nine. And the 6513 has thirteen slots.
0
Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

 
LVL 11

Author Comment

by:MajorBigDeal
ID: 35032475
Thanks again, I appreciate it very much. If there is a direct correspondence up to the number of physical slots, that would mean that is the show modules says 1,2,3,4,5,7,8,9 are defined that must mean that slots 6,10,11,12,13 are not in use.  Is that the correct way to look at it?    
0
 
LVL 50

Expert Comment

by:Don Johnston
ID: 35032733
Yes.
0
 
LVL 11

Author Closing Comment

by:MajorBigDeal
ID: 35033269
Thanks very much, I appreciate your patience and help!
0

Featured Post

Live: Real-Time Solutions, Start Here

Receive instant 1:1 support from technology experts, using our real-time conversation and whiteboard interface. Your first 5 minutes are always free.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
VIRL IP adress 3 70
Upgrade firmware on Engenius BH-ENS202Wi-Fi router 5 39
New firewall implementation guidance 12 61
2 routers and 1 public IP Address. 10 41
In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
Outsource Your Fax Infrastructure to the Cloud (And come out looking like an IT Hero!) Relative to the many demands on today’s IT teams, spending capital, time and resources to maintain physical fax servers and infrastructure is not a high priority.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question