Solved

native vlan question

Posted on 2011-03-03
2
1,363 Views
Last Modified: 2012-05-11
Here is the situation:  We have a new site that we are going to bring up data and voice on the same switch port using cisco 2960s poe switches,  the building has 3 floors and our group has talked about creating a geographical (different) vlan for the data on each floor and all floors using the same vlan for voice.  We are configuring the switch ports as trunks and will be using Avaya 9611g ip phones so my question is:  can I have a seperate native vlan for each floor since each floor will have a different vlan id for the data side ?  I think we plan on configuring vtp also.  If any one has a document that explains this it would be much appreciated along with you thoughts on this subject.

thanks
rick
0
Comment
Question by:carters1956
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 50

Accepted Solution

by:
Don Johnston earned 125 total points
ID: 35026429
> can I have a seperate native vlan for each floor since each floor will have a different vlan id for the data side ?

Yes.

>I think we plan on configuring vtp also.

No problem here.

Here's your link:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.1_19_ea1/configuration/guide/swvoip.html
0
 

Expert Comment

by:hon-da-riferous
ID: 35030591
I think you will realize that you can configure your ports as access and not have to trunk them as long as you utilize the voice vlan command. be sure to use the AVAYA 242 option and pay attention to your power consumption from the phone as they DO NOT utilize CDP for negotiation and typically use the full class allotment

!
interface FastEthernet0/1
 switchport access vlan 131
 switchport mode access
 switchport nonegotiate
 switchport voice vlan 831
0

Featured Post

Want Experts Exchange at your fingertips?

With Experts Exchange’s latest app release, you can now experience our most recent features, updates, and the same community interface while on-the-go. Download our latest app release at the Android or Apple stores today!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I eventually solved a perplexing problem setting up telnet for a new switch.  I installed a new Cisco WS-03560X-24P switch connected to an existing Cisco 4506 running a WS-X4013-10GE Sup II-Plus. After configuring vlans and trunking,  I could no…
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Do you want to know how to make a graph with Microsoft Access? First, create a query with the data for the chart. Then make a blank form and add a chart control. This video also shows how to change what data is displayed on the graph as well as form…
Suggested Courses

626 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question