Solved

Server 2008 R2 recovery Screen on boot

Posted on 2011-03-05
3
1,231 Views
Last Modified: 2012-05-11
After a windows update and a reboot, my server (running Server 2008 r2) will no longer boot in to the OS.
it will only boot in to the Recovery console screen.

I have tried StartRep.exe but it completes with no errors.
I have also tired SFC but again with no joy.

Does anyone know how i can repair my server without doing a clean install?
0
Comment
Question by:FacemanPeck
  • 2
3 Comments
 
LVL 13

Expert Comment

by:upalakshitha
ID: 35046396
type this command in recovery screen command prompt

bcdedit /set {default} recoveryenabled No

then restart in Disable automatic restart on system failure mode & see the error.
0
 

Accepted Solution

by:
FacemanPeck earned 0 total points
ID: 35340685
Belive it or not after alot of hard work it was fixed by using "last known good configuration" on the boot!
0
 

Author Closing Comment

by:FacemanPeck
ID: 35372865
.
0

Featured Post

Enterprise Mobility and BYOD For Dummies

Like “For Dummies” books, you can read this in whatever order you choose and learn about mobility and BYOD; and how to put a competitive mobile infrastructure in place. Developed for SMBs and large enterprises alike, you will find helpful use cases, planning, and implementation.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

You might have come across a situation when you have Exchange 2013 server in two different sites (Production and DR). After adding the Database copy in ECP console it displays Database copy status unknown for the DR exchange server. Issue is strange…
The recent Microsoft changes on update philosophy for Windows pre-10 and their impact on existing WSUS implementations.
In this video, we discuss why the need for additional vertical screen space has become more important in recent years, namely, due to the transition in the marketplace of 4x3 computer screens to 16x9 and 16x10 screens (so-called widescreen format). …
This tutorial will give a short introduction and overview of Backup Exec 2012 and how to navigate and perform basic functions. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as conne…

810 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question