Solved

Exchange 2010

Posted on 2011-03-05
9
737 Views
Last Modified: 2012-05-11
I have my home VMware machine thats running W2K8 R2. IT is configured as a Forest Domain controller. I have attached the error and screenshot of my server roles and features installed. I ran the power shell commands that are listed as prereqs by MS. I only have the client access that is failing for me. The error output by MS is no help.
 

Exchange2010Errors.docx
0
Comment
Question by:nopainnogain1
9 Comments
 
LVL 23

Expert Comment

by:Suliman Abu Kharroub
ID: 35044853
0
 
LVL 49

Expert Comment

by:Akhater
ID: 35045151
excuse me but what is not clear ? the error is clearly that you are missing some hot fixes

http://code.msdn.microsoft.com/KB982867
http://code.msdn.microsoft.com/KB983440 
http://support.microsoft.com/kb/977020
0
 
LVL 7

Expert Comment

by:PraveenBalan
ID: 35046272
Windows 2008 R2 SP1 is also available for download.

Windows 2008 R2 SP1 includes the hotfixes required to install Exchange 2010 SP1 , so install SP1 and run the Exchange 2010 SP1 setup.



0
Microsoft Certification Exam 74-409

Veeam® is happy to provide the Microsoft community with a study guide prepared by MVP and MCT, Orin Thomas. This guide will take you through each of the exam objectives, helping you to prepare for and pass the examination.

 

Author Comment

by:nopainnogain1
ID: 35046986
Can someone provide me link to W2k8 r2 sp1?
0
 
LVL 49

Expert Comment

by:Akhater
ID: 35047001
0
 

Author Comment

by:nopainnogain1
ID: 35048282
Installing W2k8SP1 and Exchange Sp1 get pass the original error and begins the installation. However, I am getting the following error.


Summary: 5 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:15:02
Preparing Setup
Completed
Elapsed Time: 00:00:00
Hub Transport Role
Failed

Error:
The following error was generated when "$error.Clear();
          if ($RoleStartTransportService)
          {
                start-SetupService -ServiceName MSExchangeTransport
          }
        " was run: "Service 'MSExchangeTransport' failed to reach status 'Running' on this server.".

Service 'MSExchangeTransport' failed to reach status 'Running' on this server.
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp

Elapsed Time: 00:15:02

Client Access Role
Cancelled

Mailbox Role
Cancelled

Finalizing Setup
Cancelled


0
 
LVL 49

Expert Comment

by:Akhater
ID: 35048298
go to the services what is the status of MSExchangeTransport ? try to run it manually and check event log any error s?
0
 

Accepted Solution

by:
nopainnogain1 earned 0 total points
ID: 35048422
The solution for the error is below.

For future readers of this thread, let me attempt to clarify:

Microsoft does NOT recommend unchecking IPv6 on the NIC properties.  At this time, there are issues with doing so.  Fully disabling it should not be required either, although it can workaround issues with AAAA records and other environmental issues that may be going on.  We are working on some troubleshooting content and blog post for IPv6 to better assist you with learning this technology.
Hub role failing to install is a complex issue -- we hear the feedback that many of you are having issues.  But there are different problems and different resolutions.  In order to improve the experience and better help you, we need specific errors from the setup log and from the event logs.  If your issue doesn't match the 2147504141 error above, it may make sense to start a new thread on this forum so that we can better track it and avoid confusion.  Part of the problem here is that folks are having many different errors, which explains why certain things work for some but not others.
Regarding the original error from the title of the post, 2147504141, we have published a new KB article http://support.microsoft.com/kb/980050.  This KB specifically addresses the 2147504141.  We have seen the issue be caused by other time sync issues, so it isn't necessarily specific to Hyper-V installs -- but if the clock on either the Exchange server or DCs are not correct, then the ADSI cache will not work properly and setup will fail.
I hope that this guidance is useful and I wish you luck in troubleshooting your issue.  Please do not hesitate to ask us for help and thank you for all of your feedback so that we can continue to improve the install experience.

Regards,
Scott Landry, Program Manager
Microsoft Exchange Customer Driven Quality

Marked As Answer byScottL [MSFT]ModeratorFriday, February 11
0
 

Author Closing Comment

by:nopainnogain1
ID: 35107036
I found the answer doing my own research.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

OfficeMate Freezes on login or does not load after login credentials are input.
This article lists the top 5 free OST to PST Converter Tools. These tools save a lot of time for users when they want to convert OST to PST after their exchange server is no longer available or some other critical issue with exchange server or impor…
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…
The basic steps you have just learned will be implemented in this video. The basic steps are shown to configure an Exchange DAG in a live working Exchange Server Environment and manage the same (Exchange Server 2010 Software is used in a Windows Ser…

809 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question