Solved

mail relay on sonicwall tz190

Posted on 2011-03-08
1
400 Views
Last Modified: 2012-05-11
hi,

i have a rule setup somewhere (i dont know) that stops mail from from being relayed from our firewall which is a tz190, now i want to be able to srt one to come from one of our isps, how do i do this?
0
Comment
Question by:jonathanduane2010
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 33

Accepted Solution

by:
digitap earned 250 total points
ID: 35069012
it's either going to be a LAN > WAN or WAN > LAN rule. by default, everything is blocked WAN > LAN, so you'll want to open the ports from that direction. if you created a rule, my guess is you created it LAN > WAN. since you want the traffic to flow from your ISP to your internal network, you'll want to run the public server wizard.

here's a KB on using that. if you know the public IP address your ISP, you can also change the source within the rule WAN > LAN so that ONLY the ISP can send in through your sonicwall.

https://www.fuzeqna.com/sonicwallkb/consumer/kbdetail.asp?kbid=7027


let me know if my perception of your question is wrong.
0

Featured Post

On Demand Webinar: Networking for the Cloud Era

Ready to improve network connectivity? Watch this webinar to learn how SD-WANs and a one-click instant connect tool can boost provisions, deployment, and management of your cloud connection.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article will help to fix the below errors for MS Exchange Server 2013 I. Certificate error "name on the security certificate is invalid or does not match the name of the site" II. Out of Office not working III. Make Internal URLs and Externa…
If you troubleshoot Outlook for clients, you may want to know a bit more about the OST file before doing your next job. IMAP can cause a lot of drama if removed in the accounts without backing up.
To show how to create a transport rule in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Mail Flow >> Rules tab.:  To cr…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

724 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question